-
Altair Monarch Exercise 20 - Order Status Analysis
Exercise Info * Application (Classic vs Data Prep Studio): Data Prep Studio * Level of Difficulty (Beginner, Intermediate, Advanced): Beginner * Skills/Features Tested: Join (LookUp), Template End Field On Settings, Formula Field, Analyze * Systems of Record: Not Applicable * Estimated Time to Solve: 10 mins * Exercise…
-
auto color
What is the file that controls the cycle of colors for the auto color panel?
-
EDEM-HyperStudy Connector: Installers and User Guide
Overview The new connector is a plugin for Altair HyperStudy that enables the setting of various Altair EDEM parameters directly via a simple and intuitive workflow. The connector also allows an easier connection with Altair HyperMesh for geometry optimization and DEM-CFD coupling projects. Access to the parameters for…
-
How to migrate legacy CADFEKO Lua scripts to the new CADFEKO API format
Use the ConvertLuaScript utility to migrate legacy CADFEKO Lua scripts to the latest CADFEKO API format. Migration is only applicable to CADFEKO Lua scripts created prior to version 2022.1 (it is not applicable to POSTFEKO scripts). Instructions * Download the attached utility for your system (available for Microsoft…
-
ptforce
good morning, I know that the pre-tensioning force of a bolt is managed in optistruct by applying a cut in the bolt and through the use of an independent SPoint the loads are transferred to the points of the bolt on which the pre-tensioning has been applied to simulate the screwing of the nut and therefore the shortening…
-
Altair Monarch Learning Series 2023 Exercise 6 Solution : Classic Sales & Inventory Master Analysis
Exercise Info * Application (Classic vs Data Prep Studio): Data Prep Studio * Level of Difficulty (Beginner, Intermediate, Advanced): Beginner * Skills/Features Tested: Append, Filter, GroupBy, Analyze, Join (Negative Join), Duplicate * Systems of Record: Not Applicable * Estimated Time to Solve: 10 mins * Exercise files…
-
Radioss impact simulation on solid component: how to dampen the material oscillations after the impact?
I am running an impact analysis on Radioss. I'm using a solid surface, with aluminium material and LAW 2, Isolid:14 and Ismstr: 2. After the impact of the rigid wall, the impact face of the component keeps oscillating. How can I dampen out these oscillations without messing with the results? I am thinking of using Rayleigh…
-
How to input damping coefficient on Param Card (G)?
Hi, I would like to define damping coefficient on PARAM card (G), I commonly place the usual value on the card depending of the product that I am evaluating, for example interior parts I use 3%, so on PARAM card I define on G option 3%: But on due the next article: Frequency Response Analysis (altair.com) , I was told that…
-
Bank Statements - Models & Workspaces
Overview Classic Models (.dmod) extract use templates to extract data from a specific report at a time. Classic Models can also acquire data from structured sources like Excel, CSV, and Database sources. Classic models may include filters, sorts, calculated fields, lookup fields, and summary aggregations. Data Prep Studio…
-
ADL Data Systems - LTC Patient Accounting System Monarch Models & Workspaces
Overview Classic Models (.dmod) extract use templates to extract data from a specific report at a time. Classic Models can also acquire data from structured sources like Excel, CSV, and Database sources. Classic models may include filters, sorts, calculated fields, lookup fields, and summary aggregations. Data Prep Studio…
-
Permeability in porous media
Hello experts, Is there any way using UDF that I can modify the permeability of the porous media? I am able to use the porosity model but I want to change the permeability itself as other properties (like density, viscosity, etc) using UDF.…
-
EDEM-FLUENT coupling error code 127
Hi, The error happend when I load coupling tool between EDEM 2022.1 and Fluent 2022 R2. I confirmed the System Path Environment varibles including EDEM\bin & lib. Could anyone give me some suggestions? The loading details are as follow: Reading journal file E:/ML/CFD/Case8edem/Fluent/load_edem_coupling.jou... > ;; ;;…
-
Hypermesh 2022.1 Basics Tutorial - Mismatch between text and models
Three points initially: * The downloaded tutorial models, when opened, don't match the images in the tutorial text, e.g. bumper.hm * The first tutorial (HM-1000) only has two steps, despite the first step implying there will be several * Is it correct that there is no tutorial HM-1010?
-
Software Support Policy for Data Analytics Products
Software Support Policy Latest Product Versions Product Name Current Version Versions Supported Altair Monarch (formerly Altair Modeler) 2024 Versions 2023 Altair Monarch Server 2024 Versions 2023 Altair Panopticon (formerly Panopticon Server) – Visualization Server 2024 Versions 2023 Altair Knowledge Studio/Seeker 2024…
-
Steady-state stokes flow simulation
Hi experts, I was looking at simulating Stokes' flow in AcuSolve. I went through the underlying theory and found that it is a simplification of NS equation where there's no convective term and Re of the flow is very low (close to 0). In this case, I was wondering is there any method that can be applied to solve…
-
facing an issue with Activate BEV model
facing this issue frequently with BEV model kindly suggest solution
-
Wired deformation after I applied a force/moment on a rigid body Optistruct
Hi, I want to bend the object and find the correlation between the applied force and the bending angle. I have a linear static load step on an object made of three parts: an hourglass-shaped elastic part connecting two rigid cylinders. The bottom surface was fixed (constrained in 6 DoF). I applied a force downwards, in the…
-
Is it possible to change datasource in Hyperview and Hypergraph?
I'd like to know if it's possible to change datasource in Hyperview and Hypergraph. I checked that it's possible to copy page. So as a next step, I want to change datasourse to avoid the same post processing.
-
Road definition to XZ plane
Dear All, I am trying to solve a problem with a road-tire interaction, but the road surface is on XZ plane and not on XY plane as usually. Please let me know if this is possible or not. If yes, what are the tire and road definitions that i have to use? Many thanks in advance. Best regards, Dinos
-
The rolling motion seems to be conflict with the no-slip condition in Hertz-Mindlin (no slip) model in the EDEM
Dear teams, I am trying to determine the coefficient of rolling friction in the contact model of Hertz-Mindlin (no slip). But I am not sure what is defination of the no-slip here. If there is no slip between two contact particles, how does the relative rotating of each particles happen? Can you please give me more…
-
How do i create multiple tables in monarch classic
How do you create multiple tables in the tables window in Monarch Classic (2022.1)?
-
PWM setting wih DSP F28335
Hi, everyone I am using the TMS320F28335 control board for the Dynamic Voltage Restorer circuit. I am using the code generation functions that PSIM provides for F28335 Target. I need a PWM signal that can vary normally in width, but after programming my DSP, I measured that the signal is abnormal. The duty cycle reaches…
-
profiled inlet
Hello all, I want to have a specific profiled velocity inlet using user function. Can you provide me with the sample UDF for the same? The profile I want to use is: Thanks.
-
velocity outlet (or mass flow outlet) boundary condition
Hello experts, I have been working on a problem that requires me to use velocity or mass flow outlet boundary condition. Is it possible to do so in any Altair products? Or, if this feature is not available in the GUI, is it possible to do modify the input file and use it? Thanks.
-
Global Zone EU PSIM error
Hello! What could be the reason for the following error: I tried to write several times the path where the license is located but it didn't help (in several ways). Thanks in advance!