-
why green mark is not coming for me after completed it?
after completed inspire structure v2021 it is not coming completed mark for me
-
New version for Mac OS
Hello, when are you planning to release a new version for Mac OS with native support for apple silicon? Thank you.
-
Geometry moves in Inspire Studio much slower than in EDEM
Dear all, I am trying to use Inspire Studio to render my EDEM simulation. The geometry moves very little compared to the movement observed in EDEM. My guess is the velocity of the geometry in Inspire Studio is somehow wrongly imported due to different units. In my EDEM setting, the velocity is 0.01 m/s which might become…
-
Simulate at the Speed of Design 2024
Looking to Cut Down Development Time and Lower Costs for Your Next Product? By leveraging CAE, FEA simulation technologies early in the development process, you can expedite the creation of high-performance, profitable products. However, we also understand the challenges you may face selecting the right simulation solution…
-
Crash report
JFEスチール 日下と申します。 Inspire Studio 2023をインストールしたのですが 起動しようとするとApplication crashedのウィンドウが表示され、起動ができません。 対処方法をご教示いただけないでしょうか。
-
Tryout Blank Missing
Hi, When I load a Step file, and press blank, there isn't any blank apart from the initial part itself. Do I have to create a separate flat blank sheet on top and bottom to continue the process? Or is this an error.
-
FSI Geometry
Hello to the forum, I am currently an undergraduate mechanical engineering student trying to complete my integrated master's thesis "Dynamic and Aerodynamic Analysis of an Aircraft in the Transonic Region" and I have huge problems with finding and cleaning a geometry. I designed a geometry from the beginning, based on a…
-
Ortotropic or transversal isotropic material for topology optimization
Hello everyone, I am currently writing my thesis in the field of Additive Manufacturing and am attempting to optimize the topology of orthotropic or transversally isotropic materials (specifically 3D printing materials). For this purpose, I want to provide the program with specific strength values for the three axes, which…
-
Inspire Studio write script
Hello! I am currently working on HS-1650 tutorial (HS-1650: Beam Cross-Section Study with Inspire Studio (altair.com)). At Step 9, I received an error after running definition. More specifically: Error: Inspire Studio write script not found. Set environment variable (HW_HST_CMD_ISTUDIO_WRITE) pointing to inspire studio…
-
Problemwith curved surface
I have this problem I can't solve. Why the curve is like this and not perfectly round? I have the same problem with circles: they are not circles but like polygons. Please help me because it ruins all the measures and I can't work!
-
PolyNurbs surface quailty
Hi, Is there a setting i should modify to make the surface quality better on a polynurbs object? Now you can see that in a silhuette line and in a part line there are problems. Also production engineers say that this surface is not good enough. I have tried to keep the surface as simple as possible and made sure that…
-
Inspire Studio, Render: インストール時の注意点 アセットフォルダが見つかりません
Inspire Studio, Renderはアセットをインストールする必要があり、インストール時に場所を指定する必要があります。 この場所についての注意点を説明します。 インストール時、以下のようにアセットフォルダを配置場所指定するよう求められます。 このアセットフォルダのパスはデフォルトでインストールしたユーザー配下のフォルダに作成されます。 1つのマシンに複数アカウントでログインして使う場合を想定した際、管理者の方がインストールすることが多いと思います。 この際上記の画面で、管理者のみのアクセス権があるフォルダを指定してしまうと「アセットフォルダが見つかりません」というエラーが発生します。 この際は、以下の手順で対処します。…
-
How to create photo-realistic renders of EDEM simulations using Inspire Studio
The most important part of any simulation is to gather, transfer and deliver the information obtained from the model. This usually includes some general system images or animations, in addition to some analysis. By using Altair® Inspire™ Studio to render Altair® EDEM™ results , you can visualize your system and bulk…
-
New version Inspire studio
Hello, we are almost in 2024 and the latest version of inspire studio is called 2022.3 My question is : Will you stop the software ? Thanks and best regards
-
The Inspire Structures Professional Certification is now live on learn.altair.com!
The Inspire Structures Professional Certification is now live on learn.altair.com! This certification tests your learning and expertise in Inspire’s linear static analysis and optimization capabilities through a 40-question test and a 10-question task-based model setup and report. Once both tests are passed, your…
-
I can't find the material library
When I changed from the 2019 to the 2022 version of inspire studio i saw that there isn't the material library in the render window, i can modify the material but i can't find where to apply a new one, I always had to export the file and open it in 2019 in order to render it Where can i find the library?
-
Curves that become segments
I have always had this issue, basically when i draw a nurbs curve or a circle, i see it perfectly rounded, but once i cut this curve into a solid object, the cut results as a "segmented" curve. To explain better: If i make a circle of 30mm of diameter, when i cut it into a solid cube, the hole will not be perfectly rounded…
-
How to Create Realistic Visualizations of Your EDEM Simulation Results
https://www.youtube.com/watch?v=tZ4LlNMFkGk In this webinar attendees will learn how to transfer EDEM simulation results to Inspire studio for further analysis. We will highlight the different options available to make your granular material look closer to that in your real physical application. We will also outline how…
-
A case study: Analyzing the structure and optimizing the design of the aero handlebar assembly for the bicycle used in Japan’s Olympic games.
AUTHORS Sourav Das, Francesco Di Giuseppe, Antonio Flores, Sandhya Parate, Jaideep Bangal PUBLISHER Engineering Report- Wiley SOURCE Structural Analysis, Lattice Optimization YEAR 2023 ABSTRACT This article examines a case study involving a 3D-printed titanium “aero base handlebar” that failed and caused a crash during the…
-
Inspire / InspireStudioでstlをCADに変換する方法
本記事はConverting STL files to geometry with Altair Inspire - Tips 'n Tricksをもとに作成しています。 STLファイルはCADおよびCAEでよく使われるジオメトリ形式であり、STLの品質が良い場合（すなわち、水密で、合理的なアスペクト比であり、自己貫通がない場合）、CADやCAEで簡単に利用できます。 3Dスキャンから作成したSTLファイルに多いですが、STLの品質が悪い場合はクリーニングが必要になり、この処理は非常に時間がかかることがあります。 Inspire /…
-
Missing geometry of EDEM
Dear Altair team, I am considering rendering my EDEM simulation results using Inspire Studio. When I import the .h5 file, the whole geometry is missing and only particles are shown. Could you please help me with this? Regards, Ahmed
-
Transparent background in renderings
Hi everyone, is it possible to create renderings with transparent backgrounds and save them as .png file? If so, how is it done? I cannot find any related option and in the help documentation the topic is not addressed. Thanks in advance. BR, Alex
-
Altair inspire form simulation running error.
I have a problem when ı try to run my simulation. Every time ı get this error when ı try to run it. Error Says ' Error creating new process'. I tried it with your tutorial and have same problem even with it.
-
Altair inspire studio
Hi. When ı try to make analyze always it says ''Error creating new process.'' How can ı fix it ?
-
How to export an optimized shape from Inspire to Inspire Studio in order to create a polynurbs
I followed a class Inspire Studio PolyNurbs and Optimization which took place on May 16, 2023 at 9:30 AM-12:30 PM. I would like to practice but I don't know how to export an optimized shape from Inspire to Inspire Studio as seen during the class. How do you do to be as in below ? If I import a STL file, it seems to be…