-
S-Concrete Automated Design Unexcepted Behavior
Hello, I want to use the automated design feature, but it is not iterating as expected. For some files, the automation will tend to step towards an unrealistic amount of reinforcement, such as completely removing all bars at the top, or stacking a crazy amount of bars at the top. I've attached an example where the…
-
CollectionByInteractiveSelection by choice of entity selection
Hi, With TCL, I can write *createmarkpanel [list comps solids part_assembly ] 1 "Select solids or comps or parts" But in Python (with Hypermesh 2025.1), when I tried col = hm.CollectionByInteractiveSelection(model=model, entity_class=[ent.Solid, ent.Component, ent.Part], message="coucou", ) I get TypeError Traceback (most…
-
Simulation of a RG316 with EditFeko
Hello, I am still working on this issue and would like to know how to replace one of my two wires on the outer side with a coaxial cable such as an RG316. Is it possible to simulate this in EditFeko without using CadFeko? Thank you for your response. Here is my current code. ** PARAMETRES DU CALCUL ** BANDE DE FREQUENCES…
-
HypermeshでPartsを削除するときに、支配下にあるcomponentを削除せずに残す方法
HyperMeshのv2023.0を使用しているときは、モデルブラウザでPartsを右クリック→削除した時に 「Are you sure you want to delete the selected Parts?」と、 Delete Part Contentsにチェックをつけるかつけないか選ぶことができました。 v2025ではこのダイアログが出ずに、問答無用でParts支配下のコンポーネントもすべて削除されてしまいます。 これを回避する方法はないでしょうか？
-
Ball Bearing Modeling method
Hi all, I am using Hypermesh 2025.1. I want to model the ball bearing. My current model has all 3D balls and I want to take advantage of 0D elements and DOF. My goal is to determine how much load is imparted on the balls and how much it is transferring to the surrounding connected parts. Can anyone suggest/guide me on…
-
HyperStudyとAspen Simulation Workbookとの連携について
ご担当者様 お世話になっております。表題の件につきまして、お教えいただけますと幸いです。 HyperstudyとExcelを連携し最適化計算を実施したいと考えております。 ただ、連携するExcelファイルには、COMアドインとしてAspen Simulation Workbookを使用しており、プロセスシミュレーターであるAspen Plusと連動するかたちとなっています。 このようなエクセルファイルをモデルに追加し、変数のインポートをしようとしたところ、コンソールに添付のようなエラーメッセージが出力されてしまい、エクセルファイルとの連携ができません。 Aspen Simulation…
-
Voxel Mesh Stress Analysis Results
I am referring to this documentation: Voxel Meshing It says that voxel mesh does not give meaningful results in stress analysis, but I am curious about the underlying reason.
-
Inspire extrude deformation simulation
https://us.v-cdn.net/6038102/uploads/52YHGDDKZL20/defseis.igs Hi, I am working with altair polymer extrude I could simulate the polymer flow with success, but I have problems with the deformation simulation. I attach the files. I follow all the steps from…
-
Has SLC been updated in future versions to accept ODS TAGSETS.RTF and ODS WORD?
I'm currently using SLC/AAW 2025.1, which does not accept ODS TAGSETS.RTF, nor ODS WORD. When will be the next version to support ODS TAGSETS.RTF? I've heard rumours that it is in 2026 (year or version?). When will be the next version to support ODS WORD? I've seen no mention of this statement here, or elsewhere. ……………Phil
-
I keep having a "inverted conditions" error pop up and I can not find anything about it.
Here is the error code that pops up, I cant figured out what causes this. Please Help :)
-
Example data and code to illustrate use of proc gradar in SLC
Description: I am having difficulty with getting a working example of proc gradar to produce a radar chart. There are no examples in the documentation. I have data where there are measurements taken on 5 dimensions and these are taken at two different times. I want an overlay of the plots for the two different times. If…
-
Altair slc flexible hex dump for examining a messy text or binary file
Altair slc flexible hex dump for examining a messy text or binary file Too long to post here, see github Ops question I am trying to read a .txt data file into SAS using infile. It looks like there is an issue, but I could not determine what it is. Any help to fix this would be greatly appreciated. I suggest you use a hex…
-
Mac Thea for sketchup deavtiivate a computer and reactivate a new one
Hi, I am trying to deactivate one of my machines so I can use Thea render on a new machine. Please can you assist, as I need to get this up and running ASAP. NEW MACHINE OLD MACHINE
-
I'm having issues with my solvers licensing
While I'm fine following the steps to check my student's license in hwDesktop applications, I'm encountering issues the time I try to launch any analysis in Optistruct and therefore trying to use HyperStudy module. How can i solve this issue? Thanks in advance.
-
MultiScale Designer Abaqus FEM confusing result issues
Description: Hi, I’m currently learning how to use Altair Multiscale Designer. For a simple test case, I’m using concrete as the matrix and steel as the fibers, with the following settings: Matrix: Isotropic Damage – 3-piecewise Fibers: Isotropic Plasticity, rate-independent Unit Cell: Continuous unidirectional I exported…
-
Altair slc attempts to fix the autoexec utf-8 error
Altair slc attempts to fix the autoexec utf-8 error; Too long to post in listserv, see github github https://github.com/rogerjdeangelis/utl-altair-slc-attempts-to-fix-the-autoexec-utf-8-error PROBLEM FIX THIS ERROR NOTE: AUTOEXEC processing beginning; file is C:\wpsoto\autoexec.sas NOTE: AUTOEXEC source line 1 +;;;; ^…
-
Topology Optimization X structur due to torsion
Hello everyone, for my thesis, I'm performing a topology optimization on a train car. I have different load cases, such as a compressive force or the effect of the car's own weight plus payload. In one case, the car is lifted at three of its four points, so that it's tilted in the air. This is meant to simulate a torsional…
-
(HyperMesh) 音響メッシュ作成に関する質問
There was an error rendering this rich post.
-
RE: Altair slc summary statistics on employees of the maynard corporation using a text file
RE: Altair slc summary statistics on employees of the maynard corporation using a text file Too long to post to a listserv, see github github https://github.com/rogerjdeangelis/utl-altair-slc-summary-statistics-on-employees-of-the-maynard-corporation-using-a-text-file community.altair.com…
-
Hypergraph filter failed
Hello everyone , i have a question about hypergraph filter.I am filtering the airbag pressure profile however, some errors occurred. The error message is displayed as follows. Dependent vector must have same number of points as independent. in : {y.HWRequest} -- CFC 60 J211 (Mirror Padding,…
-
Questions about creating FSS using 2D models
Hi, I'm trying to make a FSS model to conduct unit cell analysis (if possible) the problem is, I'm majoring in ME, which basically means I have very few experience + knownledge about Antennas & electromagnetic solvers I understood that I have to Unite the model to avoid overlapping meshes (despite various materials used),…
-
Unable to access to hypermesh through Student License
While trying to open hypermesh i am facing this error. I have valid license key till 2026 It was working fine till couple of weeks ago Please help me.
-
RE: Altair SLC iterating over a column that contains both numeric and character
RE: Altair SLC iterating over a pseudo column that contains both numeric and character data Too long to post here, see github github https://github.com/rogerjdeangelis/utl-altair-slc-interating-over-a-pseudo-column-that-contains-both-numeric-and-charater-data community.altair https://community.altair.com/discussion/60998…
-
Validation and Verification of Database Tables
Validation and Verification of Database Tables. Profile any SAS dataset. Cardinality, outliers, top n frequencies, bottom n frequencies, one to many, many to many, associations between numerical and character variables and duplicates on key There are two versions of VOODOO 1 SAS version see oto_voodoo_20231031.sas (full…
-
Trouble in opening a new project in PSIM
Hello and Good evening, I followed your advice and successfuly entered my student license key (via the file named gui) and it poped the messege of "license was activated and sorted in User license store" successfully. However, a messege still pops at my screen, as showen in the image below, saying the connection to my…
