-
How to connect a feed to a Polygon (PM or PY) in EDITFEKO?
I have tried making a wire segment that feeds to a polygon antenna design and I have also tried using a polygon feed to provide the source, but neither are supplying any power to the antenna design. The only voltage source I can get to work is the Voltage on Segment (A1), but I am not able to get the Voltage on Edge (AE)…
-
Robot Spider
Overview Robot spider motion example showing: * Flexible Cables * NLFE * Flexible bodies * 3D contact * Controls This example contains CAD geometry, MotionView models, results file (plots, animations, simulations file) and a presentation including the purpose, model construction, simulation details, and results obtained.…
-
Flux-Optistruct Coupling on a Rotating Machine
In this article you will learn best practices for Flux-Optistruct coupling on a rotating machine: * Creation of the mechanical mesh in HyperMesh * Creation of the computation support in Flux * Magnetic forces computation in Flux * Forces export in Flux * NVH analysis in OptiStruct with data setting in HyperMesh
-
EDEM-OpenFoam Coupling
Overview Please find attached Altair EDEM-OpenFOAM coupling. The coupling – developed using EDEM’s Coupling Interface – takes place through a new OpenFOAM solver, called EDEMCouplingDPMFoam, which is based on the DPMFoam solver from OpenFOAM. During co-simulation, EDEM provides particle data to OpenFOAM, which is then used…
-
Post-Processing Optimization Results
-
Topology Optimization with Pattern Constraints
-
Groups and Colors in Automation
-
Scripting with Process Recording
-
Topology Optimization with Manufacturing Constraints
-
Process Recording using Templates
-
Process Recording using Parameters
-
Modal Frequency Response Analysis
-
Natural Convection Around a Hot Cylinder
-
Steady Flow in a Centrifugal Blower
-
Conjugate Heat Transfer
-
Turbulent Flow in a Mixing Elbow
-
Non-Linear Static Analysis
-
CFD Meshing of a Differential Gearbox
-
CFD Meshing of Exhaust Manifold
-
EDEM- RecurDyn Quick Start Guide
As part of the release of EDEM 2018 a new co-simulation solution is available between EDEM and RecurDyn – multi-body dynamics package from FunctionBay. The attached Quick Start Guide explains how to couple EDEM and RecurDyn.
-
Simulation Driven Design of a Portable Basketball Hoop Initial Steps
A simulation-driven design process is proven to generate improved, more robust and cost-effective designs within a shorter design cycle. Incorporating simulation and optimization early in the design cycle helps shape the concept designs so less iterations and rework is necessary as the design matures. This paper is…
-
Development of the Next Generation Civil Tiltrotor
Leonardo’s Product Roadmap and the Associated Design Challenges. The Multi-Disciplinary Requirements of Tiltrotor & Other Lightweighting Studies. This is a keynote presentation from the UK Altair Technology Conference 2019 by David Matthew, Lead Engineer at Leonardo. David joined Westland Helicopters as an undergraduate…
-
HyperWorks and OptiStruct in Composite Yacht Design
Reichel-Pugh Yacht Design is a leader in design and engineering of a wide variety of sailing yachts, from 14ft club racing dinghies to >100ft maxi superyachts that hold numerous race records in the world’s most prestigious yachting events. In addition to naval architecture and stylistic design, the Reichel-Pugh studio in…
-
Solving Problems in Product Design in Aerospace
Robert Fox, Engineering Associate Fellow at Rolls-Royce presents at the UK Altair Technology Conference 2019. This presentation provides some background on Rolls-Royce products and how CAE has changed the way in which such complex products are certified as being safe to fly. The presentation then moves on to outline some…
-
Welcome - Simulation Magic
Dr Royston Jones, Managing Director of Altair UK delivers and opening presentation for the country's 11th Altair Technology Conference 2019.
