Bottle Cap compression simulation with pressurized air and water

Pierre-Christophe Masson_20773

Overview

This project presents a Fluid-Structure Interaction simulation of the compression of the cap in a bottle with pressurized air and water.

This tutorial includes:

• A ready-to-use Altair Radioss model
  • Altair Radioss version is V2022.1
  • The Unit System is in (Mg, mm, s, MPa)
• A report with a detailed description of the model
• An Altair template file showing a post-treatment example (in HyperView/HyperGraph).

 Created by Pierre-Christophe MASSON, based on model from Mathis Loverini and Adrien Robert.

Usage/Installation Instructions

See attached ALTAIR_RADIOSS_Bottle_Compression_FSI.ppsx document.