Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Tailgate in MV Door Closure Training Document

Dear team,

Is there any training document regarding " Tailgate in MV Door Closure Training Document" as mentioned in the below Community Q&A. I am unable to find such document. Please repost or share the document if you have.

https://community.altair.com/discussion/24811/door-slam-simulation?utm_source=community-share&tab=all

Find more posts tagged with

HyperGraph

HyperView

Auto Tagged

Accepted answers

Christopher_Fadanelli

Hello @Nithin_Raj_2025 ,

We have an older training for simulating door closure that can be found here:

https://help.altair.com/hwsolvers/ms/topics/solvers/ms/sim_door_close_intro_t.htm

We also have a recent article that covers the simulation of a door slam, including the modeling of the nonlinear seal between the door and the frame. You can find the article here:

https://community.altair.com/discussion/35472/vehicle-door-slam-simulation-in-motionsolve

Best,

Christopher Fadanelli

All comments

Christopher_Fadanelli

Hello @Nithin_Raj_2025 ,

We have an older training for simulating door closure that can be found here:

https://help.altair.com/hwsolvers/ms/topics/solvers/ms/sim_door_close_intro_t.htm

We also have a recent article that covers the simulation of a door slam, including the modeling of the nonlinear seal between the door and the frame. You can find the article here:

https://community.altair.com/discussion/35472/vehicle-door-slam-simulation-in-motionsolve

Best,

Christopher Fadanelli

Nithin_

Hello @Christopher_Fadanelli

Thanks for the reply.

I have gone through these tutorials, but there isn't much information regarding the procedure in the Latest article regarding Door slam using Motion Solve.

Christopher_Fadanelli

Hi @Nithin_Raj_2025 ,

The door slam article includes a sample model related to this topic, along with an overview of the model. However, please note that we do not currently offer step-by-step instructions for fully building such a system from scratch.

We strongly recommend starting with our free learning resources to become familiar with the MotionView environment. Once you're comfortable, you can review the model presented in the article for inspiration and guidance. This can help you develop a similar simulation or adapt the approach to suit your specific needs.

Hope this helps!

Christopher Fadanelli