A place to ask questions about Altair products or solutions and receive help from community members or Altair employees. Don't forget to tag with the product/topic related to your question. Once you receive a satisfactory answer on your question, kindly mark your answers as "Accepted" so it can help others with similar problems.
I'm running an electric motor simulation in Altair Flux and have a question about parameter values. In my simulation results, I can see a graph of ELTORQ_ROTOR_R (TorqueElecMag) that shows torque oscillating over time between approximately 0 and 0.014. However, in the parameter list at the bottom of my interface, I see…
My student edition license has expired, and I cannot figure out how to renew it. The Student Edition Bundle does not appear on my Altair Marketplace. Can my account be verified so that I may renew my student edition license?
Hey I am trying to make a plate fall from a height of 0.0105m with an initial velocity of 20 m/s. The time required for the plate to reach the ground is 0.5 milliseconds. If i run the simulation in Windows and give this in the environment with this as motion defination Gravity will be applied on the plate in -ve z. The…
Hello! I am both using Hyperstudy 2025 and EDEM 2025. I am working on a project where I fill up a dumper with particles and then dump it. I have had some problems to find good combinations of surface energy and other parameters for the physics models so the particles stick naturally to the dumper, so the residue in the…
Greetings, I am having a problem with a press-out analysis. I am using version 2022. The setup is as follows: Objective Preform a press out analysis of an aluminum bushing that has been assembled into an aluminum machined casting. I wish to obtain the force in which the bushing begins to slide and break free. Two Load Case…
Description: when i try to run the installer it loads up installanywhere to 100% then nothing else happens I have checked that I have enough space in my drive and also tried to execute the exe as administrator but no success. I would be very grateful if someone could give some help. Regards
Using Python and Hypermesh 2024, what would be a Python code to set the tag attribute name for a surface? I'd like to run through a list of selected surfaces in Hypermesh and have the Python code assign a sequential name (tag) to each name such as, "stiffener01", "stiffener02", etc. Thanks.
Change the computer and forget the license deactivate, I need to activate the license on the new computer.
I ran the simulation with the same boundary conditions on both versions 2022.3 and 2023.1. However, only version 2022.3 worked, while version 2023.1 gave an error as shown in the screenshot. I also tried using the result file from version 2022.3 in version 2023.1, but the error still occurred. Could you please help me…
Hi Altair, I've tried to use HyperStudy to do Simlab DoE. However, when I recorded the script in Simlab and ran in HyperStudy, I found that non-meshed coils are not selected. Is there anyway to solve the problem? Best regards, LeonLin
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.