Hyperview load results only LS-dyna d3plot
Hi
I am trying to import d3plot from ls-dyna solver. I am trying to import on the results. However, Hyperworks doesn't allow me to uncheck the 'Load model only'.
Is there anything wrong at my end? Please let me know the corrective action.
Thank you in advance.
Find more posts tagged with
This link shows us the feasibility to deactivate the load model check box.
https://2023.help.altair.com/2023/hwdesktop/hwx/topics/panels/load_results_only_t.htm
Hence, I got curious about my attempt.
Altair Employee
This link shows us the feasibility to deactivate the load model check box.
https://2023.help.altair.com/2023/hwdesktop/hwx/topics/panels/load_results_only_t.htm
Hence, I got curious about my attempt.
Yes you can just load the model (graphics) without results. But you NEED to load a model, this is the graphics in order to see the model or results.
Hello,
You need to load the model file. It can be the same as the results file (both d3plot for example), but you need a model to map the results to.
https://2023.help.altair.com/2023/hwdesktop/hwx/topics/panels/load_model_panel_r.htm