Need insights on what these errors mean

Hi Kiran, 

The error you encountered is due to the particle limit of the EDEM student edition. This edition allows you to simulate up to 10,000 particles, but the snow accumulation tutorial requires more than that. Unfortunately, you cannot run large simulations with the student version, but you can still learn the software by following other tutorials. Please see the links below for some examples:

https://community.altair.com/community/en/edem-tutorial-3-rock-box?id=kb_article&sysparm_article=KB0037183

https://community.altair.com/community/en/edem-tutorial-2-screw-auger?id=kb_article&sysparm_article=KB0037182

Regards,

Cesar

Hello Cesar,

Thanks for the answer, I have checked the tutorials you've mentioned and it gives a lot of insight into what the software has to offer.
In the past I have executed cases with factory generating more than 10000 particles per seconds. 

I deleted a few parts from the geometry and changed the number of particles from 500,000 to 20,000 in the particle factory & now the case seems to be working.

The only problem being that the simulation is taking forever to run, what hardware configuration would you recommend for running heavy cases?

Thanks,

Kiran

Hello Cesar,

Thanks for the answer, I have checked the tutorials you've mentioned and it gives a lot of insight into what the software has to offer.
In the past I have executed cases with factory generating more than 10000 particles per seconds. 

I deleted a few parts from the geometry and changed the number of particles from 500,000 to 20,000 in the particle factory & now the case seems to be working.

The only problem being that the simulation is taking forever to run, what hardware configuration would you recommend for running heavy cases?

Thanks,

Kiran

Hi Kiran. 

EDEM Student edition has the following limitations:

• 2 x CPU max (no GPU)
• Disabled functionality on CFD Coupling Interface, MBD coupling interface, Heat Transfer Module and Field Data Import.

For large simulation we tend to use the EDEM GPU solver with a good GPU card. Minimum Machine spec in the link below:

https://community.altair.com/community/en/what-are-the-system-requirements-for-running-edem?id=kb_article&sysparm_article=KB0117125

Regards,

Cesar