How to use a .sta file? RADIOSS

Hi

There is this tutorial with usage of *.sta file for stress initialization

https://2021.help.altair.com/2021/hwsolvers/rad/topics/solvers/rad/fan_blade_rotation_initialization_impact_example_r.htm

I hope this is helpful.

Regards

your link is not helpful.

It doesn't explain anything about file .sta.

please help me!!!

Hi

There is this tutorial with usage of *.sta file for stress initialization

 

https://2021.help.altair.com/2021/hwsolvers/rad/topics/solvers/rad/fan_blade_rotation_initialization_impact_example_r.htm

 

I hope this is helpful.

Regards

thank you for you your replace but this is not what i'm looking for.

Hi,

iam also performing sequential drop test simulation. can you help me in the setup for sequential drop. I have used state card but the contacts are not exported.

Thanks in advance,

Hi,

iam also performing sequential drop test simulation. can you help me in the setup for sequential drop. I have used state card but the contacts are not exported.

 

Thanks in advance,

 

state files carry only stress/strain and thickness to another model.

All the other you should build a new model, by keeping the IDs only.

In you case you're probably looking for restarting your analysis from a previous one. Take a look at 'restart' in Radioss documentation.