Card "FREQUENCY" is not allowed for this subcase type.
Altair Employee Hi to everyone
I am running a non linear quasi static analysis on hypermesh 2017 (optistruct) with contact surfaces
When I run the analysis I get the following error:
*** ERROR # 1461 *** in the input data:
Card 'FREQUENCY' is not allowed for this subcase type.
Can someone help me?
Find more posts tagged with
Altair EmployeeSorry for not explaining myself very well, but the problem is that I haven't assigned any 'FREQUENCY' card, it appears on its own as an error, ergo I didn't put any frequency in the input data but the error says otherwise.
Could you please share the .out file of the run for quick look?
Altair Employee
this is the .out file of the analysis
Didn't find anything specific from out file.Please check below post where user able to fix this issue by deleting setting files.
https://community.altair.com/community?id=community_question&sys_id=0a66003a1b2bd0908017dc61ec4bcb86
Altair EmployeeOk, thank you, I solved from the .fem file deleting the string which contained the frequency card.
Actually, you don't need to assign 'FREQUENCY' in the loadstep definition for a quasi static analysis . That field is for frequency response analysis.