Geometrical non-linear implicit analysis

Hi 

try opening the file by notepad then add a line with 'BEGIN BULK' before above GRIG line

@Punith

Remove the OMIT card from control cards,

Unable to find an attachment - read this blog

@Prakash Pagadala

Thank you so much.

@Punith

 

Remove the OMIT card from control cards,

Hello

I ran your plate.fem file in Radioss17.2; it gives the attached error. Could you please let me know how to manage it?

Furthermore, do you know any tutorial for implicit dynamics, please? How can plate.fem be changed to have an implicit dynamic plate tutorial?

Thank you.

Unable to find an attachment - read this blog

Hi @Question

You are trying to run an OptiStruct file using RADIOSS solver

Please use OptiStruct instead of RADIOSS.

Hi @Question

 

You are trying to run an OptiStruct file using RADIOSS solver

 

Please use OptiStruct instead of RADIOSS.

Hi

Thank you for your help. I ran it in OptiStruct. It works well.

Do you know an implicit dynamic example, please?

Please refer to OS-T: 1520 Finite Sliding of Rack and Pinion Gear Model

Hi

Is it possible to have a time dependent load on plate.fem file and run it in implicit, please?

Thank you.

Hi

Is it possible to have a time dependent load on plate.fem file and run it in implicit, please?

Thank you.

Please run a transient non linear analysis. 

Search for the same in the forum for a sample file

Hi Prakash

I am running a geometrical non-linear implicit analysis. Is it possible to see the attached error file and tell me how to fix the problems?

Thanks & regards

Unable to find an attachment - read this blog

HI,

Looks like the starter executable is missing,

Can you please check if the file s_2017_linux64  is available in the location: /share/apps/EC_STRUCT_SIM/HYPERWORKS/2017/altair/hwsolvers/radioss/bin/linux64/s_2017_linux64.