Topology optimization on coupled thermal-structural model
Altair EmployeeHi,
I´m trying to perform a topology optimization for coupled thermal-structural loading with the aim of minimizing compliance for a certain initial volume fraction.
How can I act on minimizing the structural compliance only while setting a constraint on the thermal one when considering the coupled loadstep?
Or is there any suggestion on how to best approach such a topology optimization ?
Thank you
Find more posts tagged with
Thank you Rahul for your quick response. But I am missing the point: if I do minimize thermal compliance on the thermal model it works but I am not able to minimize the overall compliance on the coupled model, featuring also pressure loads and in particular to constrain the thermal one while minimizing the structural compliance one. Is there a way to act on the coupled loadstep to do so?
Thank you
Actually I have an other question on the model you sent me: how are you able to consider convection on both design and non design space?
I tried with CHBDYE elements but nothing worked, not even if I limited in the non design space when trying to minimize thermal compliance.
This the related error:
*** ERROR # 5008 ***
Heat transfer subcase ID = 1 has convection and thermal compliance
response.
Optimization with thermal compliance cannot continue.
Actually I have an other question on the model you sent me: how are you able to consider convection on both design and non design space?
I tried with CHBDYE elements but nothing worked, not even if I limited in the non design space when trying to minimize thermal compliance.
This the related error:
*** ERROR # 5008 ***
Heat transfer subcase ID = 1 has convection and thermal compliance
response.
Optimization with thermal compliance cannot continue.
Thermal compliance for coupled thermal structural case is under development. We will let you know once this feature is available.
Hello laurak,
Can you please tell me how to assign thermal compliance to a heat transfer subcase?
Please refer below post.
https://community.altair.com/community?id=community_question&sys_id=35860c3a1b2bd0908017dc61ec4bcbd6
Hello Rahul,
'Thermal compliance for coupled thermal structural case is under development. We will let you know once this feature is available.'
Can you please let me know what do you mean by this? I wanted to minimize compliance (not thermal compliance) on a coupled thermal-structural coupled model. The result I am getting not removing material at all almost!
I am attaching the FEM file.
Please refer attached information from help for topology optimization of coupled thermal-structural loading.
<?xml version="1.0" encoding="UTF-8"?>
Unable to find an attachment - read this blog