Axial symmetric analysis
Altair EmployeeHello All,
I am doing an analysis on a cylindrical model and because of the time consuming, I start to do axisymmetric analysis on a 2D vertical section. I applied the boundary conditions right however, the results only is monitored on the first row of quad elements that face the imposed velocity i applied.
I know there is something wrong but I cannot discover it wither is with my axisymmetric option or the constraints?
your help will be appreciated!!
here is the model.
Answers
-
And, how to get the 360 degree results of the part?
0 -
0
-
-
thank you. but i did the same as the hopkinson example with the result below. it only show the deformation in the row of quad elements where the load applied on. what is the wrong with the model?
<?xml version="1.0" encoding="UTF-8"?>
0 -
Hi,
Ok, I will check and let you know soon
0 -
here is the model for the previous picture
0 -
Hi,
What are the units used in the model?
There is a load curve and the same is not used. Is there a reason for that?
0 -
Kg, mm , ms, KN, J & GPa.
for the curves and different stuff, I just put them try to load it with concentrated load but it does not have any effect on the model. I don't know why, but if you have answer I will appreciate it.
0 -
OK,
I have changed the BCs to check the results. I will share it ASAP!!
0 -
Hi,
With different constraints, I got the same results and I don't see any problem with the model.
I will check with another model and update you the results.
0 -
Hi,
Please use 2D solid elements. Here is a simple model based on the pdf shared.
0
