how to perform doe in hypestudy with ls dyna solver?

Rahul Ramesh Zambre

I am trying to set up DOE with HyperStudy with the LS-DYNA solver.

I am using the HS-1560 tutorial model for the study.

After setting all variables and the model, when I submit the test model run, it shows an error.(Refer to the image below).

Error : Error writing model ( HyperMesh Command 1 ( m_1 ) ).

Garima_Singh

Hi @Rahul Ramesh Zambre,

Since, there is a support case CS0789970 on the same, kindly check the recommendations provided via mail.

Many thanks.

Kind Regards

Garima Singh

Engineering Data Science