🎉Community Raffle - Win $25

An exclusive raffle opportunity for active members like you! Complete your profile, answer questions and get your first accepted badge to enter the raffle.
Join and Win

STATSUB (PRELOAD) in Linear Static Analysis

User: "Mandy Kramer"
Altair Community Member
Updated by AltairLiz

Hello,

I'm having difficulty using the STATSUB (PRELOAD) option within my linear static load case. I would like to use an applied force preload to a bushing element in the attached .fem file. The sample distributed load is equal and opposite to the preload, which should result in a no-deformation condition.

The four load cases in the sample model are as follows:

  1. combined load: LOADADD of the preload and distributed load. This should result in a balanced zero-deflection result. Results are as expected
  2. preload: linear static load case with the preload force assigned to the "LOAD." This should result in a 0.25" extension of the bushing element. Results are as expected.
  3. STATSUB (PRELOAD): references "preload" case under STATSUB (PRELOAD) with distributed load assigned under "LOAD." This should result in a balanced zero-deflection result, but looks equivalent to load case 4.
  4. distributed load: distributed load assigned under "LOAD." Preload is not applied in this case. This should result in a 0.25" compression of the bushing element. Results are as expected.

image-a155848f6208f-dc94.png

Please help me to understand why load case 3 is not behaving the same as load case 1.

Thank you,

Mandy

Find more posts tagged with

Sort by:
1 - 1 of 11