Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

UNITS AND results of the MODEL pos processing

Leonardo Panicali Carlech

Hello,

Question 1:

In HM, where is the option to set units like kg-m-s etc. before starting the analysis ?

Question 2:

I have tried to finish a FEM model in the HM, but the Solver Radioss identified the following mistake, as such: Attachments;

According the results of posprocessing of my model in HM, the measurements of components would be in meters, by example. I did during the modeling how the measurements in mm. Is It right?

I am sending my model.hm to checking.

Best Regards!

Leo

AXIALFORCE1.hm

erros_units.docx

RADIOSS_ERRORS_ID55.docx

Find more posts tagged with

English

HyperMesh

v2021.1

Accepted answers

All comments

QuyNguyenDai

User is only responsible for UNIT in any FE analysis. Have a look at "Unit consistency":

Leonardo Panicali Carlech

Please,

The question 2 wasn't replied.

I sent may model.hm to check it!

Question 2:

I have tried to finish a FEM model in the HM, but the Solver Radioss identified the following mistake, as such: Attachments;

According the results of posprocessing of my model in HM, the measurements of components would be in meters, by example. I did during the modeling how the measurements in mm. Is It right?

I am sending my model.hm to checking.

Best Regards!

Leo

Adriano_Koga

Please,

The question 2 wasn't replied.

I sent may model.hm to check it!

Question 2:

I have tried to finish a FEM model in the HM, but the Solver Radioss identified the following mistake, as such: Attachments;

According the results of posprocessing of my model in HM, the measurements of components would be in meters, by example. I did during the modeling how the measurements in mm. Is It right?

I am sending my model.hm to checking.

Best Regards!

Leo

there's something wrong with your material #2, as showed in your .out file.

Your material named PolyUMod_BB is really strange, and it is marked as 'UNSUPPORTED'.

Please take a look at it.

Community-Pasted-Attachment-1623787106304.png

Leonardo Panicali Carlech

there's something wrong with your material #2, as showed in your .out file.

Your material named PolyUMod_BB is really strange, and it is marked as 'UNSUPPORTED'.

Please take a look at it.

Thank You for your comment, but:

I have used PolyUmod materials together with Radioss 2021 using HyperMesh. Because of this use the material was selected as: MAT_UNSUPPORTED

....Number of dataline: 25 and etc...

platafform: https://polymerfem.com/polyumod/