Modeling and analysis of a synchronous reluctance motor (SynRM)

Limin
Limin
Altair Employee
edited March 21 in Altair HyperWorks

Studied device

The studied device, a synchronous reluctance motor, is running in motor mode. As presented in the figure below, it includes the following elements:

  • a fixed part (stator) including yoke, slots, and windings
  • an air gap
  • a movable part (rotor) with flux barriers

image

 

Basic EM analysis

All physics definitions of the motor can be realized by the proposed [MT2D Workflow] toolbar

image

 

The coil regions are shown in the figure below, and it is coupled with a circuit defined by the [Circuit Designer]:

image

 

After solving the scenario, SimLab can provide some basic post-processing for the eMotor analysis, including the isovalue visualization and the physical quantity plotting.

image

 

============================================================================================================
Example access

All files corresponding to this example are accessible with this link:

Step to follow:

  • to follow the example step by step, the corresponding files are in "Example_name_StepByStep" folder containing:
    1. Tutorial folder: contains the document describing the example step by step
    2. Input folder: contains *.slb databases and files needed to build the example step by step
  • to play scripts, the corresponding files are in "Example_name_PlayScripts" folder containing:
    1. ScriptsTutorial folder: contains script files to be able to play each analysis
    2. Input folder: contains initial *.slb databases and all necessary files to play each analysis script

=============================================================================================================

Tagged:

Categories