Any limit on no. of rbodies in model

gopal_rathore
gopal_rathore Altair Community Member
edited October 2020 in Community Q&A

Hi,

I am facing a issue  in rbody initialisation . I have around 8000 rbodies in model/ These rbodies were off in first engine file and has been turned on in the second engine file. During the second engine run , rbody initialisation starts and it gets stuck at one of the rbodies after some time and after that there is nothing happening. Is there any limit issues with total no. of rbody in model.or anything else,

Kindly let me know.

 

Thank you.

Tagged:

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Gopal,

    There are no such limits for rigid bodies and no such issues are known. Which HyperWorks version are you using?, 

    Please share the model via dropbox so that I'll try running the same from my end too.

     

  • gopal_rathore
    gopal_rathore Altair Community Member
    edited March 2017

    Hi,

    I have sent the files. I am using version 13.

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Gopal,

    The model file runs for me. I terminated the run after the second engine file started since the run takes more time to complete. I tried the same in HyperWorks 2017 version. I recommend you to download and install the latest HyperWorks suite,  HyperWorks 2017  which can be downloaded from https://connect.altair.com/

    Attaching the T01 and T02 files for reference. 

    Unable to find an attachment - read this blog

  • gopal_rathore
    gopal_rathore Altair Community Member
    edited March 2017

    Hi,

    Thank you for your input george.

    Meanwhile can you let me know |what me the issue with this version, as I have been running such simulations with same methodology, but have not faced any issues and is the first time I am getting it.

     

    Thank you.

     

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Gopal,

    There are no similar bugs or similar issues reported for this version. Normally it should run. Delete all the settings files and also clear your temp directory and try running the same. 

  • gopal_rathore
    gopal_rathore Altair Community Member
    edited March 2017

    Hi ,

     I am running the job in a linux cluster. Can you let me know about the files that needs to be removed in linux similar to what we do in windows set up i.e commamd.cmf, hw settings etc.

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Gopal,

    In the Home location you can find the settings file (hmmenu ot hmsettings files, .tcl...etc).

Categories