Custom output definition

1) you can use Altair Compose to write a routine that quickly extracts the value that you need and perform the calculation

2) you can request OptiStruct to write the Displacement in a text format, such as OPTI format, and only for this particular node, by defining a SET of nodes. This will write a .disp file, in ASCII format.

1) you can use Altair Compose to write a routine that quickly extracts the value that you need and perform the calculation

2) you can request OptiStruct to write the Displacement in a text format, such as OPTI format, and only for this particular node, by defining a SET of nodes. This will write a .disp file, in ASCII format.

Thank you,

Currently, I can't use compose, in any case, is it possible to have the output just for one load-step and possibly just the vertical displacement?
I have tried some solutions through the optimization panel by setting a response but since I am not running an actual optimization I can not display the response

Thanks in advance for your suggestions

Thank you,

Currently, I can't use compose, in any case, is it possible to have the output just for one load-step and possibly just the vertical displacement?
I have tried some solutions through the optimization panel by setting a response but since I am not running an actual optimization I can not display the response

Thanks in advance for your suggestions

using OPTI format you can ask this result for a particular LoadCase, under OUTPUT.

But it will always give you all displacement components.

As far as optimization, you can just run a 'zero' iteration optimization, and you can get these values outputted, including the math for stiffness if you know yhow to work with function DRESP2.

If you to optimization >> opti control, you can define the DESMAX=0

using OPTI format you can ask this result for a particular LoadCase, under OUTPUT.

But it will always give you all displacement components.

 

As far as optimization, you can just run a 'zero' iteration optimization, and you can get these values outputted, including the math for stiffness if you know yhow to work with function DRESP2.

If you to optimization >> opti control, you can define the DESMAX=0

Thank you very much. If I manage to do it the "simulated" optimization may be the best way.
I have created responses for the static displacement along dof3 and I have checked DREPORT and selected the DREPORT_LOADSTEDPS from which I want to output the nodal displacement. The problem is that not being an actual optimization I got this message:

*** ERROR # 583 ***
Missing objective, DESGLB and DESSUB data must be used together with
an objective function defined by DESOBJ, MINMAX, or MAXMIN.

Any idea on how to solve it?

Thanks in advance

Thank you very much. If I manage to do it the "simulated" optimization may be the best way.
I have created responses for the static displacement along dof3 and I have checked DREPORT and selected the DREPORT_LOADSTEDPS from which I want to output the nodal displacement. The problem is that not being an actual optimization I got this message:

*** ERROR # 583 ***
Missing objective, DESGLB and DESSUB data must be used together with
an objective function defined by DESOBJ, MINMAX, or MAXMIN.

Any idea on how to solve it?

Thanks in advance

you need to have all the necessary entiteis for an optimization, even a fake one.

You need to define an objective.

Just create a 'mass' response and make it as objective minimize mass.

you need to have all the necessary entiteis for an optimization, even a fake one.

 

You need to define an objective.

Just create a 'mass' response and make it as objective minimize mass.

Thank you very much!