Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

Radioss Errors

oggy

Hi !! I receive this message when I run errur radioiss

ERROR ID : 286

** ERROR IN INPUT CONSISTENCY

DESCRIPTION :

QUAD ARE NOT COMPATIBLE WITH N2D3D=0

.. UNITS SYSTEM

.. MATERIALS

.. NODES

.. PROPERTIES

.. 2D SOLID ELEMENTS

.. 3D TRIANGULAR SHELL ELEMENTS

.. SUBSETS

.. ELEMENT GROUPS

.. PART GROUPS

.. SURFACES

.. NODE GROUP

.. BOUNDARY CONDITIONS

ERROR ID : 54

** ERROR IN INPUT FORMAT

DESCRIPTION :

IN BLOCK : 3272 28559 28593 30836 30842 34365 34369 34374

Find more posts tagged with

English

Radioss

Accepted answers

All comments

Altair Forum User

Hi Oggy,

could you please let me know what is the element type, material law and property type are you using?

Try the below suggestion and check if you still get error ID 286:

Goto 2D page>> ELEMTYPES>> make sure for 2D and 3D are as shown in the below image. If not change the tria3=SHELL3N and quad4=SHELL4N.

For Error ID: 54, have you assigned PART card image to component? if not please check this and also, update property and material to components.

<?xml version="1.0" encoding="UTF-8"?>

oggy

Hi Mr Pagadala,

The material that i'm using is MAT1_Elast, i verified that tria3=SHELL3N and quad4=SHELL4N. for the last one i checked that each component have its materiel & property.

Altair Forum User

Oggy,

please share the model file.

use the dropbox link in signature below to share the file.

oggy

Ok its done

Altair Forum User

i have been getting this error for more elements saying quad element has null surface , input consistency, property 1 is invalid errors.Can you please urgently help me .

Altair Forum User

Hi,

I hope the modified file worked for you.

In order to plot force Vs reaction forces, you can add REACF to output block and use the T01 to plot the same using HyperGraph

Altair Forum User

Hi Prakash,

I am facing similar problem. I've checked the element types also. Everything is fine. Can you please help me.

I am using an area connector between two components to connect them.

I will attach my model here.

Thank you so much.

Unable to find an attachment - read this blog

Nachiket Kadu_22143

@dilip_sdk

Try updating the elements and delete all cards and again prepare using default cards in engine assistant.

For Updating elements go to>>2D>>elem types>>tick on 2d&3D>>elements (All)>>Update.

Delete all cards then go to Tools>>engine files assitant and prepare cards again.