TSTEP is automatiocally adding in nonlinear quastatic analysis

Hi, 

there is no TSTEP entry for nonlinear quasistatic analysis. Make sure you are choosing the correct analysis type- it should be non-linear quasi-static not generic.

<?xml version="1.0" encoding="UTF-8"?>

Check this video also. See the load step creation after 8:00 min

Sir i am not adding TSTEP s I t is automatically adding up in the deck file .

<?xml version="1.0" encoding="UTF-8"?>

<?xml version="1.0" encoding="UTF-8"?>

The NLPARM and TSTEP load collectors share the same ID (3). Each LC needs a unique ID, which might be causing the error.

But i am not adding the time step . I dont know why it is adding in all the solutions.

When iclick on optistruct to solve ,In the deckfile TSTEP is being created.

After i deleted the .tcl and hm.setting files from My Documents the problem got resolved .

Thanks for the support.

Hi 

I am rinning a nonlinear quastatic analysis . I am putting it for solve its giving an error  

 *** ERROR # 1461 *** in the input data:
 Card 'TSTEP(TIME)' is not allowed for this subcase type.

 

 the input data TSTEP is adding on its own .how to deactivate this .?

 

Hi ! 

TSTEP is for transient analysis. 

If you want to run Non Linear Quasi Static Analysis, NLPARM is sufficient /emoticons/default_smile.png' srcset='/emoticons/smile@2x.png 2x' title=':)' width='20' /> 

Best regards ,

Hi All

I did not create any TSTEP .I created a Non linear Quasistatic solution ,and exported(solver deck file).

In the FEM file i observed a TSTEP card  is added.For all the solution (Liner or Nonlinear )TSTEP is automatically added in the deck file.

After i delete the .tcl and .settings file from the documents , The problem got resolved.

Pleace help me to solve this problem 

 
 *** ERROR # 1461 *** in the input data:
 Card 'TSTEP(TIME)' is not allowed for this subcase type.
 

I did not create any TSTEP .I created a Non linear Quasistatic solution ,and exported(solver deck file).

In the FEM file i observed a TSTEP card  is added.For all the solution (Liner or Nonlinear )TSTEP is automatically added in the deck file.

After i delete the .tcl and .settings file from the documents , The problem got resolved.

tried this step also it doesn't work  kindly help me 

Unable to find an attachment - read this blog

Please make sure to set the analysis type as nonlinear static instead of generic in loadstep.