**ERROR ID : 760
Altair EmployeeHello everyone,
I am new to Radioss Block120 while doing analysis I got following error :
.. BLOCK FREE FORMAT
.. STARTER RUNNING ON 1 THREAD
.. CONTROL VARIABLES
.. UNITS SYSTEM
.. FUNCTIONS & TABLES
.. MATERIALS
.. NODES
.. SKEW SYSTEMS
.. PROPERTIES
.. 3D SOLID ELEMENTS
.. 3D SHELL ELEMENTS
** ERROR TRAPPED : REPORT TO LISTING FILE
ERROR ID : 760
please help me. thanking in advance.
Regards,
Suraj
Answers
-
Hi Suraj,
Assign PART card image to component(s).
Right click on component(s) in model browser>> Edit>> Card Image>> PART and apply the changes.
Once done, run the job and let us know if you are through the error
/emoticons/default_smile.png' alt=':)' srcset='/emoticons/smile@2x.png 2x' width='20' height='20'>
0 -
Hiii Prakash,
Thanks for your reply. I have assigned components with Card Image>> PART.
but same error is repeating.
UBSET: 0,GLOBAL MODEL
~~~~~~
|
|________Part(s): 17,1
18,2
19,threads
20,b
22,Inner
23,Shank
25,c
26,Nut
27,washer
28,w1
29,bolt
30,Nut_1
+=============================================================+
| ABNORMAL END |
| Segmentation Violation |
| TRACE BACK : |
+=============================================================+
GROUPS
+=============================================================+ERROR ID : 760
** ERROR TRAPPEDRegards,
Suraj
0 -
Hi Suraj,
please share the file using the drop box link in the signature below
0 -
looks like the problem is in contacts. can you delete the groups and check if you are through the error?
0 -
Prakash
I have deleted contacts but same errors is repeating.
Regards,
Suraj
0 -
Hi Suraj,
Commercial support is handling your issue.
0 -
DELETION FLAG CASE FAILURE OF MASTER ELEMENT (0:NO/1:YES) SET TO 0SLAVE SURFACE INPUT BY NODES
MASTER SURFACE INPUT BY SEGMENTS
+=============================================================+
| ABNORMAL END |
| Segmentation Violation |
| TRACE BACK : |
+=============================================================+
INTERFACES
+=============================================================+
ERROR id : 760
** ERROR TRAPPEDWhat i should do ?
0 -
Hi,
This issue seems to be with the interface defined in the model.
Please share the file through the secure dropbox link for reviewing.
0 -
Sir due to some reason I can not share the file ?Please tell me how to deal with this problem ?
0 -
Hi,
Please share the starter out file. Also, please run the model checker so that we can know which interface is creating issues.
What type of analysis are you doing and what type of interfaces are there in the model.
0 -
type 2 contact and conc load on nodes with loading in milliseconds.
0 -
Hi,
As a workaround please remove the interface and run the model file, so that we can confirm whether this issue arise from the interface.
0 -
if I REMOVE INTERFERENCE HOW THE PARTS ARE GOING TO GET ATTACHED?
0 -
Hi,
This is just to confirm whether this issue is causing due to the interfaces. If the deck runs fine we can confirm the same.
At that case user has to recreate the interface properly.
0 -
ESSAGE ID : 168
** STOP : ZERO OR NEGATIVE VOLUME
FOR 10 NODES TETRAHEDRON ID=1747918, INTEGRATION POINT=1
ERROR TERMINATION==== End of solver screen output ====
0 -
Yes, the simulation run without any error on changing boundary condition.But my question is how it is possible that without applying contact the part is not flying, as I am fixing one component and applying force on other?And there is no transfer of force on a component other than component on which force is applied?
0 -
even I run the components one by one by applying random forces it giving results?how to deal with the contact problem?
0 -
Hi,
With the proper definition of contacts only you can a get a realistic simulation with sensible results. Since you are not defining an contacts you can check whether the components are penetrating. Only after reviewing the model we can comment much on this.
0 -
I checked penetration and removed all interference and penetration.
0 -
I created a example which is similar to my problem.Please suggest me solution for this.Please describe the problem solution.In my case i am using 10 noded tetra element instead of 4 noded.
Thank you
<?xml version="1.0" encoding="UTF-8"?>
0 -
Hi,
Please try with the attached model file.
Meanwhile, i recommend you to upgrade to the latest HyperWorks version, which is HyperWorks 2017 which has many features. Please visit http://www.altairhyperworks.com/hw2017/ for more.
The free Student Edition can be downloaded from http://www.altairuniversity.com/free-hyperworks-2017-student-edition/
0 -
I am not able to run it.Please suggest me what is the basic thing which I am missing during modelling?That i need to change ?
0 -
Hi,
I just recreated the Type 2 contact in the model. When Type 2 is created select only those nodes and elements that needs to be kinematically connected.
Please go through the model file shared in the last post.
<?xml version="1.0" encoding="UTF-8"?>
0 -
If the surfaces are uneven ?
0 -
NEGATIVE MASS ON NODE ID=28855 getting this error now
0 -
Hi,
The Interface Type 2 with Spotflag =0, this can cause an error in RADIOSS Engine at the first cycle, due to a negative mass. You could try Spotflag=1 and see if that helps.
0 -
Altair Forum User said:
Hi,
Please share the starter out file. Also, please run the model checker so that we can know which interface is creating issues.
What type of analysis are you doing and what type of interfaces are there in the model.
Hi George,
How to run the model checker as you mentioned? Can we only do a check run by using HyperWorks Solver Run Manager in Windows system?
Roy
0 -
Hi,
Model Checker option is available in hypercrash in Quality tab.
0 -
Hi Roy,
In HyperMesh you can perform model checking using Model Checker from Tools menu.
0 -
Thank you for gopal and George
Is it possible to do a check run by using HyperWorks Solver Run Manager in Windows system?
Roy
0
