Error ID 79 : ** ERROR : DUPLICATE ID

2»

Answers

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    These are based on the applications. If user wants to create the component rigid,it should be done using Rbody. Whereas for connections spring elements can be used.

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    I have cleared the Rbody error by using spring elements with high stiffness, but unable to clear the admas error.

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    Please recheck the /ADMAS defined in the model. You need to create a nodal group (/GRNOD) and then assign this to the /ADMAS card.

     

    /ADMAS/0/1235199
    admass_ADMAS1060
    #               MASS  grnod_ID
                     .11     30823
    /GRNOD/NODE/30823

     

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    I have cleared this admas error.but getting the following error

     

     ABNORMAL END                                            |
     |          Segmentation Violation                             |
     |     TRACE BACK :                                            |
     +=============================================================+
           RIGID BODY ELEMENT DEACTIVATION                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
     +=============================================================+

    ERROR ID :          760
    ** ERROR TRAPPED

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    This seems like a modelling error. Please share the model files and out files.

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    File shared to your dropbox

     

    Thanks

    RAM

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    What is the modeling error in that model?

     

    Please let me know the corrections to be made.

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    I just got your model. Will check and update you.

     

     

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    Thanks for your update

     

    Tanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited November 2020

    Hi Ram,

    Please update your HyperWorks suite to the latest version and try running. I got only the error regarding the interface defined.

    HyperWorks 2017 suite is available at https://connect.altair.com/. Please update and try running.

    .out file is attached for your reference. 

    Unable to find an attachment - read this blog

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    What is the error in interface definition??

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    Please check the interface defined in the model. You can review the same error in the out file attached in the above reply.

    <?xml version="1.0" encoding="UTF-8"?>Capture.PNG

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    I have deleted and recreated the interfaces but still the error occurs

     

     ** ERROR TRAPPED : REPORT TO LISTING FILE
    ERROR ID :          760

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    Did you try the same with latest version, HyperWorks 14 or HyperWorks 2017?

    Please share the out file.

  • RAMGANESH
    RAMGANESH Altair Community Member
    edited March 2017

    Dear George,

     

    Shared the out file in your dropbox

     

    I am using version 13 ....

     

    Thanks

    RAM

  • Altair Forum User
    Altair Forum User
    Altair Employee
    edited March 2017

    Hi Ram,

    Please update your HyperWorks suite to the latest version and run the analysis. Please try with HyperWorks 14 or HyperWorks 2017 version.

Categories