Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 1.

Hi,

I'm newbie, I was simulating the thermal transfer ( flux + convection ) follow it's tutorial. And I had a error:

'*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 1.
*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 2.
*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 3.'

I don't understand that so can anyone help me ? Thanks.

I used Tetra (Tetra mesh) element type and tried to redefining the property and material for components.

Unable to find an attachment - read this blog

Find more posts tagged with

English

OptiStruct

Accepted answers

All comments

Altair Forum User

You should assign the required property (it depends from your kind of analysis) to the component which contains CQUAD4 elements

image.png.fed3bd4163b9e712855bff4b0410037e.png

Pranav Hari

Hi,

I'm newbie, I was simulating the thermal transfer ( flux + convection ) follow it's tutorial. And I had a error:

'*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 1.
*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 2.
*** ERROR 14: Missing property # 1 referenced by CQUAD4 # 3.'

I don't understand that so can anyone help me ? Thanks.

I used Tetra (Tetra mesh) element type and tried to redefining the property and material for components.

Hi Phat Vu

I checked your file. This error is due to the presence of Quad4 shell elements in your model which has no defined property.

Try deleting the quad4 elements using Delete > Elem > by config > quad4 and then run the analysis.

The analysis has completed from my end.

<?xml version="1.0" encoding="UTF-8"?>

Unable to find an attachment - read this blog

Altair Forum User

Hi Phat Vu

I checked your file. This error is due to the presence of Quad4 shell elements in your model which has no defined property.

Try deleting the quad4 elements using Delete > Elem > by config > quad4 and then run the analysis.

The analysis has completed from my end.

<?xml version="1.0" encoding="UTF-8"?>

Thanks for your help. I forgot it when I transferred 3D mesh from old component to new one.