Modify car crash error.
Altair EmployeeI want to analyze car crash simulaltion.
A crash test was performed using a CFRP laminated front bumper.(The bumper is made from hypermesh)
However, an error occurred and the Radioss run did not proceed.
Please remove the error and let it be simulated.
(Test5 file is radioss files)
Altair EmployeeThanks Goerge
Can I get a engine file?
Model.zip has a start file only.
Altair EmployeeAltair EmployeeThank George,
I changed the bumper in your model to another bumper.(in hypercrash) However, an error occurred when I run Radioss. Please correct the error.
the error message is
ERROR ID : 553
** ERROR IN TH GROUP DEFINITION
.. GEOMETRY PLOT FILE
.. ERROR ==> NO RESTART FILE
ERROR TERMINATION
------------------
1 ERROR(S)
297 WARNING(S)
PLEASE CHECK LISTING FILE FOR FURTHER DETAILS
Attach New bumper rad.
Altair EmployeeHi Domado,
There are no errors reported in this model (bumper_0000.rad). If you find any errors please upload the starter out (_0000.out) file also with the same.
Altair EmployeeThank George.
I merge that bumper file in your Model file.
Attach file
Altair EmployeeHi George,
I run your modified model, but this file has some errors.
Please modifiy this errors
Attach file
Altair EmployeeAltair EmployeeHi George,
I run your first modified model, but this file has some errors.
Please modifiy this errors
Attach file
Altair EmployeeHi Domado,
NEGATIVE VOLUME or ZERO VOLUME is terminating the run. This error happens when solid elements are very deformed and their characteristic length goes to 0. For large strain formulation the time step of an element goes to 0 when the element is compressed. In RADIOSS Starter input file (Runname_0000.rad), use Ismstr =2 in the solid property and when using this formulation, set Isolid =14 and try running the simulation.
Altair EmployeeThanks George.
How to use Ismstr =2 in the solid property and set Isolid =14 ?
Please show me how to use and set.
Altair EmployeeHi Domado,
Click on the solid properties in the model browser and edit Ismstr and Isolid in the entity editor. Please see the attached image.
<?xml version="1.0" encoding="UTF-8"?>
Altair Employee MESSAGE ID : 205
** RUN KILLED : ENERGY ERROR LIMIT REACHED
MESSAGE ID : 207
** RUN KILLED : TOTAL MASS ERROR LIMIT REACHED
NC= 2745 T= 2.2238E-03 DT= 2.9651E-09 ERR= 99.9% DM/M= 2.1967E+22
ELAPSED TIME= 537.91 s REMAINING TIME= 18812.98 s
ANIMATION FILE: NEON_OP3_new_merge_newmatA002 WRITTEN
This message appears. Should I change the values of all properties?
And this file increases kinetic energy.
Altair EmployeeHi Domado,
I have uploaded the modified files to the other post you have created. http://forum.altairhyperworks.com/index.php?/topic/18481-how-can-i-continue-to-run-this-model/
Please run with those files and update.
Hi Domado,
Please update the laminate1_1 property with P9_SH_ORTH property and try running. Update with appropriate thickness.
Unable to find an attachment - read this blog