A place to ask questions about Altair products or solutions and receive help from community members or Altair employees. Don't forget to tag with the product/topic related to your question. Once you receive a satisfactory answer on your question, kindly mark your answers as "Accepted" so it can help others with similar problems.
Hello I am trying to understand this tutorial In this tutorial i see that When i look at the .cu file provided with the document i do not see the custom properties Now, looking at this tutorial, I am getting even more confused. Have you defined the custom property anywhere in the CUDA file, but the tutorial says CUDA…
Guys, how to make contours plots of temperature (not results in HyperView, but applied thermal loads in HyperMesh)? I have TEMPERATURE(LOAD) and TEMPD cards in my Nastran deck. I know how to do it in Patran Loads/BCs/ Plot Contours/Temperature/. Then select Load case, Select existing Set: temp.### Select Data Variable:…
Hi I don't have access to my old PC where I had installed Altair. How can proceed to be able to reactivate the license in a new PC? Thanks
Hello, I just installed, hyper study and during the License setup, I'm unable to activate. is that i should provide the Local server and file location. Please help.
I built the half-bridge, and I want to calculate the different the loss ,and using the mos to replace the igbt. I don't know how to calculate the different losses and set the positive and negative gate drive.
We recently renewed our Adademic license for Altair and we were provided with a new network license to provide for use of the product in our campus labs. Nothing has changed on the server side of things…..same MAC etc and I've verified that the new license matches what we had for that info from last year. Clients worked up…
When I run EDEM as shown in the attached file, license error 1 and error code 9 appear and it does not run. What is the solution?
When compiling using Dsim, the compilation failed when it tried to compile this line. `define width 4 `define init 0 … count <= `width'd`init; By my understanding, the defined macro should be preprocessed before the compilation stage, so it should resolve to this: count <= 4'd0; It will be helpful if I can get away with…
Can I setup 12 symmety plane to optimize the structure as above picture? I find only 3 symmetry plane can be used. Can I setup contact between gears as load to optimize it? Thanks! Sherlock
"In HyperWorks CFD 2022.3 , I am facing an issue while plotting streamlines for the internal fluid cavity used for lubrication purposes. The problem is transient in nature, and the pin rotates about the sub-axis. How can I capture the changes in velocity, pressure drop and rise, and mass flow rate in the streamlines?
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.