A space for simulation related technical resources and discussions.
This article shows in tabular format the port types supported by the Feko solution methods. This is important to know since the model construction and solution method dictate the type of port to use. The port types in CADFEKO per solution method. See Ports and sources in Feko for more information on ports, sources as well…
This article is a practical guide on how to add a port to an imported mesh. As an example, we will look at an imported mesh model of an automobile with a monopole attached to the roof. An imported automobile model (meshed using Altair HyperMesh) with a monopole antenna on the roof. Since the antenna is a wire and meshed…
HyperWorks 2022.3.0 introduces several key usability and performance enhancements to its Browsers, which significantly improve the user experience. The new Browser enhancements offer compelling functionality, providing more control and insight into the model, along with better performance while interrogating the model.…
One of the greatest characteristics of our society is diversity. We are all different, and those differences allow us to create the exceptional world we live in. This is translated into our jobs, where based on our personalities, skills, and virtues we pursue different objectives creating the necessary synergy to make a…
To change the value of the scale factor or the offset of a curve, you need to select the desired axis and then change the value(s) in the entity editor.
Altair® Radioss® 2022.3 Highlights Introducing this 2022.3 release, with a constant focus on improving user experience, robustness, and performance, including the ability to read directly LS-DYNA[1] input format, Altair Radioss broadens the community of users and lowers the entry barrier to adopt cutting-edge simulation…
Using Altair Radioss, it is possible to define multiple Engine files (_0001.rad, 0002.rad…). It is a powerful feature, and some common applications include: * Pre-tension or initializing gravity before a simulation. * Changing the time step control options used. * Turning on and off rigid bodies. * Changing the write…
Kicking off the 4-part coffee break concrete design series, this first session provides an introduction to S-CONCRETE, a powerful tool for designing reinforced concrete columns, beams, walls, and continuous beams with strength and serviceability in mind. Generate comprehensive design reports that encompass detailing checks…
PollEx is a great extension to any design software due to its robust verification capabilities. To better enhance the experience, PollEx has the Link to ECAD feature which allows users to view areas of interest on Allegro’s PCB Editor when reviewing verification results. Figure 1 PollEx (left) and PCB Editor (right)…
There tends to be significant hesitancy toward verification tools, mostly when comparing them to a design software’s design rule checking (DRC). DRC is a set of rules that prevent errors in design and are applied live when a user is designing a printed circuit board (PCB). For PCB designers and manufacturers in the…
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.