A space for simulation related technical resources and discussions.
Do you often define and visualize custom results for your models in HyperView? Do you find this process tedious when analyzing several different models? You can leverage flexible report files (TPL files) and Compose to streamline the process and display any custom results you define for any model you want! This tutorial…
Table of Contents * Models * Use Case * Format and Definition * Example and Validation * Superelement Generation * Residual Run with DMIGMOD * Validation with Full Mesh model * Useful links Models The models used in this article can be found here: Models Use Case Superelements are a very useful technique to simplify…
Description This tutorial shows how to use SimLab to run electromagnetic analysis with Flux solver for electric motors. The studied device, a brushless AC embedded permanent magnet motor, includes the following elements: a fixed part (stator) including yoke, slots, and windings an air gap a movable part (rotor) with…
Inverters and converters are critical components for electric vehicle charging and energy management during operation that require specific thermal management. Otherwise, high heat loads in the system can lead to thermal runaway, which can damage the vehicle, batteries, charging stations, and can be unsafe for the…
Interested in leveraging Finite State Machines in your 1D, multi-domain simulations? Altair Twin Activate features the State Machine Library for defining discrete and continuous time Finite State Machines that can be incorporated into your block diagram models. For you to get started using this library, this video shows…
(This is a translated version of a blog posted by Kosuke Ikeda. The original blog in Japanese can be found here). In this blog, we discuss a workflow to find the bucket shape that optimizes the particle filling process during an excavator digging cycle. The simulation of this process is done using Altair Inspire parametric…
Gravity (/GRAV) and Imposed Acceleration (/IMPACC) are two types of loads with similar behavior in some applications. As a result, the confusion between the two is a common mistake in simulation set-up. Imposed Acceleration (/IMPACC) is the total acceleration of a body. No matter what happens this body is subjected to a…
Hello Everyone, Please find the below newly added features which will be available in the next SimLab release (SimLab 2024.1). Solutions * Review Contacts: Solutions > Contacts > Right click * The "Both" option under "Display contacts surfaces" is enabled by default. Solution: Drop test solution Solver: Abaqus * Define /…
MFA Setup Select required Multi Factor Authentication for Extra Verification for your Altair One account. One or Multiple Authentications can be set from the below list. * Password: Using this option, the user can re-set their Altair One password. * Click On Reset * Then Click on Yes when the below window opens. * Verify…
In the video attached, you can gain insights into freely optimizing designs using topology optimization while simultaneously considering electromagnetic (EM) and mechanical constraints. Explore method to optimize without predefined parameters and uncover novel topologies that integrate structural and magnetic…
There's a wealth of content waiting for you to explore! Need support or have a question? Login or join our community.