HM Output Settings LS-Dyna

Hi,

 

I recently started to use Hypermesh 2017.2 as a Preprocessor for LS-Dyna. I'm already quite satisfied with the usability besides one exception: since we're using LSPrepost for the model creation as well, which is providing a clean and structured output regarding the keywords, Hypermesh doesn't:

 

LSPrepost:

*MAT_PIECEWISE_LINEAR_PLASTICITY_TITLE
ALUMINUM PURE 99.45-O CONDITION
$#     mid        ro         e        pr      sigy      etan      fail      tdel
         12.71300E-6     68948      0.33  0.013362       0.0    0.2723       0.0
$#       c         p      lcss      lcsr        vp       lcf   
       0.0       0.0         3         0       0.0         0
$#    eps1      eps2      eps3      eps4      eps5      eps6      eps7      eps8
       0.0       0.0       0.0       0.0       0.0       0.0       0.0       0.0
$#     es1       es2       es3       es4       es5       es6       es7       es8
       0.0       0.0       0.0       0.0       0.0       0.0       0.0       0.0

 

HM:

*MAT_PIECEWISE_LINEAR_PLASTICITY_TITLE
ALUMINUM PURE 99.45-O CONDITION                                                 
         12.7130E-06   68948.0      0.33  0.013362       0.0    0.2723       0.0
       0.0       0.0         3         0       0.0
$$ HM Entries in Stress-Strain Curve =         8
       0.0       0.0       0.0       0.0       0.0       0.0       0.0       0.0
       0.0       0.0       0.0       0.0       0.0       0.0       0.0       0.0

 

I also attached the original and HM output file to point out the difference.

As far as I see, I'm not using very fancy keywords that HM should be able to process and which it's doing for the *DATABASE and *CONTROL keywords. Are there any setting options I missed? Or do I need an add-on to receive clean keyword output throughout the whole file?

 

Thanks in advance for your support.

 

Regards

 

 

Christian

Unable to find an attachment - read this blog