Modal Analysis

My Elastic modulus value is 200000 MPa (200 GPa)

Hi Parthiban,

As you are using E=200000MPA, then you can go for density as 7.8e-9 ton/mm3.

You can refer the below consistent unit system.

As you can see for 7.8e-6 density value, E value should be 210GPA or 0.21mN/mm2.

Hope this answers your query.

Thanks

Rajashri

Hi Parthiban,

As you are using E=200000MPA, then you can go for density as 7.8e-9 ton/mm3.

You can refer the below consistent unit system.

As you can see for 7.8e-6 density value, E value should be 210GPA or 0.21mN/mm2.

Hope this answers your query.

Thanks

Rajashri

Thanks Rajashri, 

Thanks Rajashri, 

Hi Parthiban,

You can mark the queries as resolved where you got the correct answers.

You can look into the previous queries and mark them as resolved too.

That will be helpful for us.

Thanks

Rajashri