Try to make mapable but some part is not mapable. how to done mapable other part some is tell me.
turbine.STEP is as file i try to make mapable but some part is only done and I face problem in some part. How can do this.
Find more posts tagged with
Sort by:
1 - 4 of
41
Thankyou,but It's not done
Altair EmployeeThankyou,but It's not done
Were you able to get the two cylinders on the right to show up mappable?
Altair EmployeeWere you able to get the two cylinders on the right to show up mappable?
I split up the model a little more.
Yes this is a tricky one. The connections to the fins and the shaft is what makes these unmappable. For the ones on the shaft it is a pretty easy fix. If you split the solids as if the smaller diameter shaft is continuous that should make those mappable.
The fins are a little trickier. I really good approach isn't coming to mind right now. Maybe split up the cylinder to just one section with one fin, mesh that manually then copy it, rotate it and equivalence nodes. That is not a very elegant solution. Maybe someone else will have a good idea for that area.