An exclusive raffle opportunity for active members like you! Complete your profile, answer questions and get your first accepted badge to enter the raffle.
Yes this is a tricky one. The connections to the fins and the shaft is what makes these unmappable. For the ones on the shaft it is a pretty easy fix. If you split the solids as if the smaller diameter shaft is continuous that should make those mappable.
The fins are a little trickier. I really good approach isn't coming to mind right now. Maybe split up the cylinder to just one section with one fin, mesh that manually then copy it, rotate it and equivalence nodes. That is not a very elegant solution. Maybe someone else will have a good idea for that area.
turbine.STEP is as file i try to make mapable but some part is only done and I face problem in some part. How can do this.
Altair Employee
Yes this is a tricky one. The connections to the fins and the shaft is what makes these unmappable. For the ones on the shaft it is a pretty easy fix. If you split the solids as if the smaller diameter shaft is continuous that should make those mappable.
The fins are a little trickier. I really good approach isn't coming to mind right now. Maybe split up the cylinder to just one section with one fin, mesh that manually then copy it, rotate it and equivalence nodes. That is not a very elegant solution. Maybe someone else will have a good idea for that area.