hypermesh 14 visualization mode not work in mine
hello every one ,
i make mesh hm 14 , but i cannot see it mesh , because both geometry and mesh are same it
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
Find more posts tagged with
Altair EmployeePersonally, I use different components for geometry & mesh in order to better visualize.
@Q.NGUYEN-DAI @Rahul R please look up below videos
Could you share same hm file to me?It looks like a single quad element.
Altair EmployeeCould you share your HM model?
Also share graphic drivers information.
@Q.NGUYEN-DAI @Rahul R my pc intel i5 graphic imbelded
Altair Employee <?xml version="1.0" encoding="UTF-8"?>
Update: I have NVIDIA Quadro 2000M on my laptop.
Attached is screenshot of mine.I believe problem is because of graphic drivers.Updating driver should fix this issue.
<?xml version="1.0" encoding="UTF-8"?>
I see your driver updated on 2011.Please update your graphic driver to fix this issue.
Altair EmployeeYou have always two factors: hardware & software. Before updating your driver, make sure you have good & supported hardware (card) already.
@Rahul R @Q.NGUYEN-DAI finally i update my graphic its work thanks to all
<?xml version="1.0" encoding="UTF-8"?>
Thanks for the update.
If you zoom in model then you would find mesh lines.This is new feature which would allow model to manipulate easily.Using Options : Colours : Auto to black would help you to visualize mesh with black lines.
If all this option don't work then update graphics driver.