Getting 0 stress from a 1D model beam
Hi Everyone,
I'm doing FEA for a simple cantilever beam with a circular cross section and a tip load. I did a 1D mesh with a PBAR property. I got through the analysis part with OptiStruct, the displacement I got was okay but the thing is when I analyze the 1D stress somehow it turned out to be 0. How could this happen and how do I generate the stress?
Feel free to check out my model as I attach it to this question. Looking forward for your reply all!
Thanks!
Find more posts tagged with
Sort by:
1 - 1 of
11
If you are using PBAR/PBEAM property, you need to specify stress calculation points in your section (points C,D,E,F...).
If it is a standard section (circular, rectangular, omega, ..) i'd recommend you to use the property PBARL/PBEAML instead, as it automatically outputs stress at these section points.Otherwise, you will need to add a continuation line to your PBAR and define the stress points manually.
From PBARL/PBEAML documentation