One half of completely symmetric geometry not mappable
Altair EmployeeHello,
could someone please explain to me why I can't mesh one part of my completely symmetric geometry?
I tried various cutting locations and axes, but I always receive one or more parts of the geometry, which are not mappable. However, theoretically, everything should be okay.
Thank you very much for your help!
Best,
Chris
Find more posts tagged with
Altair EmployeeBut shouldn't be the part on one side of the geometry be mappable when the corresponding part on the other side and every other part as well, are mappable?
Good luck :-)
Altair EmployeeThanks! Did you have a look on the model? Could you give me any advice how I could process the part further to make it mappable?
If it's my job, I'll do that with mixte meshing: tetra + hexa + pyramid.
Altair EmployeeOkay, I'll give that a try. Thakns
Can you post a photo? I don't have hm to open it
Altair EmployeeCan you post a photo? I don't have hm to open it
Yes, of course! Please let me know if you require more pictures or different angles.
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
Symmetric geom does not mean that's mappable!