cannot run simulation with 2023.1 version in Inspire Cast
I ran the simulation with the same boundary conditions on both versions 2022.3 and 2023.1.
However, only version 2022.3 worked, while version 2023.1 gave an error as shown in the screenshot. I also tried using the result file from version 2022.3 in version 2023.1, but the error still occurred.
Could you please help me figure out how to fix this issue?
Find more posts tagged with
I tried in 2023, 2024.1 and 2025 versions but all fails
Altair EmployeeHi! @Minh_169
Can you send me your setup model so I can check on my end regarding the issue?
You can see detail in below link.
Thank you so much.
Altair EmployeeHi @Minh_169,
The reason for your run failure was the setup configuration. Do not consider first value of pressure to be 0. This is why it is throwing you an error.
Altair EmployeeHi @Minh_169,
The reason for your run failure was the setup configuration. Do not consider first value of pressure to be 0. This is why it is throwing you an error.
Hello @Minh_169,
The versions of Inspire Cast you are using are pretty old. There are various upgrades in configuration from 2022.3 to latest 2025. I suggest you to upgrade the version to 2025 and check. if it still fails, let me know.