I am trying to model nylon (Ertalon PA6 PLA) buffers which are impacted by an AA7075-T6 piston at various speeds from 10 to 250 m/s. I have used Material Law 36 PLAS_TAB to input stress-strain data from literature across various strain rates (up to 6000/s), with and without HEAT_input parameters, and with and without EOS Gruneisen card. I am not having much success in validating this material model, and have tried some material models such as Modified-Sherwood Frost (user input) to no avail. I am wondering if anyone has recommendations for PA6 material models / parameters that I can use, as literature seems to be lacking in validated FE material models for these high speeds/strain rates, and I don't have access to the material cards from Altair Material Data Centre. Any help would be much appreciated!