The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
お世話になっております。
Inspireでトポロジー最適化から剛性の最大化を実施した後に解析を実行したところ、「ひずみエネルギー密度」が表示される場合とそうでない場合の2通りが現れました。
解析モデルによって変わるようですが、エラーの発生などはなく関連する設定が見つからないため原因が不明です。
すみませんが、考えられる原因について教えてもらえないでしょうか。
また、この場合は適切な解析が行われていないと考えた方が良いでしょうか。
よろしくお願いいたします
HyperViewをご利用可能な場合、optiAnalysis.h3dを開き、コンターから以下のようにひずみエネルギー密度を表示できます。
実行フォルダを開き、optiAnalysis.femにESE(H3D) = ALLがあるかご確認いただけますでしょうか。
ありがとうございます。
ESE(H3D) = ALLの記載を確認しました。 解析モデルによらず存在しています。
ありがとうございます。 HyperViewにて確認することができました。
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…