License problem during Optimization
Altair EmployeeHello , I use license at university server. I have problem with license during Optimization. I can use HyperMesh, Hyperview without any problems, I can run static analysis also normally but when I try run Topology optimization fatal error occure. Please help me,
Greetings, Kris
RADIOSS/OptiStruct ERROR: 1.
A fatal error has occurred in your model. Please refer to the .out
file to obtain more information on how to correct it.
License error:
Altair License Manager: License error
Feature: GlobalZoneEU
Error Code: 17
Error Description:
[LOCAL] C:\Program Files\Altair\12.0\/security/altair_lic.dat - (Err: 6) Unable to read file
[NETWORK] 6200@149.156.xxx.xxx - (Err: 17) Request for more licenses than available on license server
Feature: OptiStruct
Error Code: 9
Error Description:
[LOCAL] C:\Program Files\Altair\12.0\/security/altair_lic.dat - (Err: 6) Unable to read file
[NETWORK] 6200@149.156.xxx.xxx - (Err: 9) Feature not found
License Path: C:\Program Files\Altair\12.0\/security/altair_lic.dat;6200@149.156.xxx.xxx
==== End of solver screen output ====
Find more posts tagged with
Optistruct needs 25units(25000) for analysis & for optimization it needs 50 units.Hypermesh needs 21 units for preprocessing.
Have a look at two line abow. Maybe you ask a feature which does not available on your server or feature exists but not enough for your request.
Ask your License server admin to have a look on log file of server.