Generating .tbl File for PSIM IPM Nonlinear Controller from Altair Flux

Khizer321

Dear Altair Community,

I am currently working with the PSIM v.2025 IPM nonlinear controller, which requires input data in a .tbl format, as shown in the attached example (Ld_Ldq.tbl). I would like to generate this .tbl file from Altair Flux v.2025

Could you please guide me on how to achieve this? Specifically:

1. Is there a built-in method in Altair Flux to export inductance values (Ld, Lq) in .tbl format?
2. If not, is there any script or automation method available to generate this file format from simulation results?
3. Any examples, documentation, or scripts would be highly appreciated.

Looking forward to your insights. Thank you!

 

VSiddhartha

Hi @Khizer321 ,

Please follow these Tutorials:

Thank you,

Vishwanatha Siddhartha

Khizer321

Dear @VSiddhartha,

Thank you for your response and for referring me to the Altair Flux and FluxMotor tutorials. However, I would like to clarify that these model as shown in Fig.1, primarily deal with losses and other machine characteristics.

I am specifically referring to a model named "PMSM (Nonlinear IPM) Drive" used in PSIM as shown in Fig.2 , which requires only a .tbl file as input. My goal is to generate this .tbl file directly from Altair Flux. As the tutorials you mentioned requires generation of .mat file not the .tbl file

Could you please guide me on whether there is a built-in script or method in Altair Flux to directly export this data in the required format? If not, is there an example or workflow available to automate this process?

Looking forward to your insights.

Best regards,