Road modeling

hi Draucis,

I have attached easy way to model the PCD road using hypermesh to create and export .fem along with the format required.  hope this will help you.

thanks,

jagadeesh 

hi Draucis,

I have attached easy way to model the PCD road using hypermesh to create and export .fem along with the format required.  hope this will help you.

 

thanks,

jagadeesh 

Hello Jagadeesh,

Thanks a ton for your help, yes it definitely helped as I was looking forward to understanding PCD road for a while now. Still my problem remains as the data I have from MATLAB is different and I want to make a road profile out of it. Sorry for a lack of better understanding but from the file I have attached are you able to understand anything of how to use that data in a road file, because I don't have a clear image yet.

Regards

Draucis

Hello Jagadeesh,

Thanks a ton for your help, yes it definitely helped as I was looking forward to understanding PCD road for a while now. Still my problem remains as the data I have from MATLAB is different and I want to make a road profile out of it. Sorry for a lack of better understanding but from the file I have attached are you able to understand anything of how to use that data in a road file, because I don't have a clear image yet.

Regards

Draucis

hi Draucis,

you can use 3D spline road file from MV installation folder "....\hwdesktop\hw\mdl\autoentities\properties\Tires\ALTAIR_ROADS" and replace the xyz coordinates with available excel/matlab derived data and create the road using road tool. The additional information like obstacles can be deleted if they are not required. I have attached a sample road created using 3D spline for your reference.

thanks,

jagadeesh  

hi Draucis,

you can use 3D spline road file from MV installation folder "....\hwdesktop\hw\mdl\autoentities\properties\Tires\ALTAIR_ROADS" and replace the xyz coordinates with available excel/matlab derived data and create the road using road tool. The additional information like obstacles can be deleted if they are not required. I have attached a sample road created using 3D spline for your reference.

thanks,

jagadeesh  

Hi Jagadeesh,

Thank you I think this will work out. I will try this out. I cannot see the attached reference file though. It's fine I'll try it out anyways.

Thanks 

Draucis

hi Draucis,

you can use 3D spline road file from MV installation folder "....\hwdesktop\hw\mdl\autoentities\properties\Tires\ALTAIR_ROADS" and replace the xyz coordinates with available excel/matlab derived data and create the road using road tool. The additional information like obstacles can be deleted if they are not required. I have attached a sample road created using 3D spline for your reference.

thanks,

jagadeesh  

hi Draucis,

please find the sample road attachment.

thanks,

jagadeesh  

hi Draucis,

please find the sample road attachment.

 

thanks,

jagadeesh  

 

Thanks, Jagadeesh. In helping terms you are a God to me.

It's getting repetitive in saying thanks, I hope you don't mind but Thanks again for helping out.

Regards 

Draucis