Tires are missing from the model in Hyperworks MotionView

Simas Junevičius

Hello,

after creating suspension model and saving it, if I open that model later, the tires are missing and I get following errors: 

1. MotionView(General) Error: Can't open file "[my working directory] can't read "LM(blModeRepoWS)": no such variable" on line 499 of "[.mdl file in my working directory]" for parsing.
2. MotionView(General) Error: Unknown definition def_comp_tirepair on line 506 of "[.mdl file in my working directory]".  System cannot be instantiated.

What could be the problem? Thankyou.

Simas

GTT Adam

Hi Simas,

Does this issue persist for all models featuring AutoTires?

Please test the following to help isolate the potential issue:

1. Start a new instance of MotionView
2. Open the Sedan model using the Entity Browser >> Vehicle Tools >> Examples >> Sedan.
3. Save the MDL to your desktop
4. Close MotionView
5. Open MotionView
6. Open the Sedan MDL from your desktop
7. Do the tires load correctly?

Since this MDL will use default tire models from the installation directory, then if they open as expected we can assume the issue is isolated to the tire property file you may be using or your assembly.

 

Hope this helps!

Adam Reid

Simas Junevičius

Adam Reid_21142 said:

Hi Simas,

Does this issue persist for all models featuring AutoTires?

Please test the following to help isolate the potential issue:

1. Start a new instance of MotionView
2. Open the Sedan model using the Entity Browser >> Vehicle Tools >> Examples >> Sedan.
3. Save the MDL to your desktop
4. Close MotionView
5. Open MotionView
6. Open the Sedan MDL from your desktop
7. Do the tires load correctly?

Since this MDL will use default tire models from the installation directory, then if they open as expected we can assume the issue is isolated to the tire property file you may be using or your assembly.

 

Hope this helps!

Adam Reid

Hello,

tires did load up for the sedan model, however, I got following errors (in the attached log file). Thank you in advance.

Christopher_Fadanelli

Hello Simas,

 

Can you confirm that you have the solvers installed? Go to File -> Help -> Updates and System Information. In updates Information, see if hwsolvers is among the list. If it is not, then the solvers need to be installed.

 

Best,

 

Christopher Fadanelli

GTT Adam

Simas Junevičius said:

Hello,

tires did load up for the sedan model, however, I got following errors (in the attached log file). Thank you in advance.

Hi Simas,

Are you using an education version of MotionView? You may need to install the standard version of HyperMesh Desktop and Mechanical Solvers, then generate a student license file from the same site.

 

Hope this helps!

Adam Reid

Simas Junevičius

Adam Reid_21142 said:

Hi Simas,

Are you using an education version of MotionView? You may need to install the standard version of HyperMesh Desktop and Mechanical Solvers, then generate a student license file from the same site.

 

Hope this helps!

Adam Reid

Hi Adam, 

yes, I am using student edition of Hyperworks, so MotionView must also be for students. What do you have in mind when saying "standard version of HyperMesh Desktop and Mechanical Solvers"? Do I have to pay for them? Also, I cannot find products with those names in maketplace. Thank you for your answer.

 

Have a nice day!

Simas

Simas Junevičius

Christopher Fadanelli_22565 said:

Hello Simas,

 

Can you confirm that you have the solvers installed? Go to File -> Help -> Updates and System Information. In updates Information, see if hwsolvers is among the list. If it is not, then the solvers need to be installed.

 

Best,

 

Christopher Fadanelli

Hello Christopher, 

I checked and there aren't anything under "Updates Information:". Do I have to install solvers separately? It is a fresh install of HyperWorks, so maybe I did something wrong installing it. Thank you for your answer.

 

Best regards, 

Simas

Christopher_Fadanelli

Simas Junevičius said:

Hello Christopher, 

I checked and there aren't anything under "Updates Information:". Do I have to install solvers separately? It is a fresh install of HyperWorks, so maybe I did something wrong installing it. Thank you for your answer.

 

Best regards, 

Simas

Hi Simas,

 

The solvers is a separate installation file. You can download the solvers in Altair Marketplace. https://altairone.com/Marketplace?queryText=MotionSolve&tab=Info&app=MotionSolve 

 

Best,

 

Christopher

Simas Junevičius

Christopher Fadanelli_22565 said:

Hi Simas,

 

The solvers is a separate installation file. You can download the solvers in Altair Marketplace. https://altairone.com/Marketplace?queryText=MotionSolve&tab=Info&app=MotionSolve 

 

Best,

 

Christopher

This is what I see, when I press on MotionSolve in marketplace (in the attachment). Maybe there is a problem with my licence?

GTT Adam

Simas Junevičius said:

Hi Adam, 

yes, I am using student edition of Hyperworks, so MotionView must also be for students. What do you have in mind when saying "standard version of HyperMesh Desktop and Mechanical Solvers"? Do I have to pay for them? Also, I cannot find products with those names in maketplace. Thank you for your answer.

 

Have a nice day!

Simas

Hi Simas,

The links for those products are in my previous post. 

I have included them again below:

HyperMesh Desktop

Mechanical Solvers

 

Hope this helps!

Adam Reid

Christopher_Fadanelli

Simas Junevičius said:

This is what I see, when I press on MotionSolve in marketplace (in the attachment). Maybe there is a problem with my licence?

Hi Simas,

If it is a student addition, please follow the steps on the student edition site: https://web.altair.com/altair-student-edition 

Are you logged into marketplace with your Altair One Account you created?

Best,

Christopher