Error in creating Rivet using .CSV file

Nithin M

I have created Entry & Exit points for a rivet point in excel and saved in .CSV format.

when I upload this .CSV point for river creation in " Connection > Rivets > Import rivets from .CSV ", I am getting this error

Community-Pasted-Attachment-1714713263635.png

Community-Pasted-Attachment-1714713485936.png

rdominguez

Hello, Nithin.

Do you already have another manually declare rivets in your model? The warning indicates that there's an existing rivet in the same zone where you want to import a new one.

Make sure the existing rivets are not close to each other in a radius of 5-10 mm to each other, try and reduce the rivet diameter before importing the .csv to see if that works.

Some recommendations:

• Check if there are not other rivets in the same zone (or close) whose radius could collide with the imported rivet.
• Create extra coordinates to check if this situation repeats for all of them or only for particular coordinates.
• Try to reduce the number of decimals in the Y coordinate.

Let me know if this works.

Best,

R.