The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
I'm running a CFD to a cuadricopter drone and I want to analyze flux in the propellers. I have tried Motion>Rotation>Axis&velocity but it does not work. Any ideas?
Hi @Guillermo Rodríguez Pérez ,
I think your issue quite similar to these tutorials.
Maybe it can help you setting up boundary conditions.
Tutorial 1: https://help.altair.com/hwcfdsolvers/acusolve/topics/tutorials/acu/acu_5000_intro_cfd_c.htm#acu_5000_intro_cfd_c
Tutorial 2:
https://help.altair.com/hwcfdsolvers/acusolve/topics/tutorials/acu/acu_5001_intro_cfd_r.htm#acu_5001_intro_cfd_r
Best regards,
James
If you are trying to do in steady state, you can use reference frame (on the cylindrical volume around the propeller) and specify rotational axis with rotational speed in terms of radians per second.
You might find this helpful: Reference Frame Setup (altair.com)
Join us for a community conversation on how High-Performance Computing (HPC) and Simcenter PSIM work together to meet the increasing demands of modern power electronics simulation. During this one-hour technical session, you'll discover how leveraging HPC can speed up simulations, improve scalability, and empower engineers…
Join us for a community conversation on accelerating your motor simulation workflow with Simcenter Simlab. In this beginner-friendly session, we'll introduce the platform's automated model-building capabilities and show how easy it is to set up your first electric motor analysis. You'll see the basic steps of geometry…
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
