Error of Solving Flux 3D
Hello,
I have build a 3D Modell of a electrically excited synchronous machine. It has a winding support and end cap at the end of machine. By solving an error happend, 'Non managed error'. I have checked the modell several times. But I can't find the causes of this errror. Could someone help me to solve it? Thanks for your help.
<?xml version="1.0" encoding="UTF-8"?>
<?xml version="1.0" encoding="UTF-8"?>
Answers
-
By the way, the error happens after building the electrical loop cut.
0 -
Hi,
• When I do check geometry I get an arror message :
WARNING Geometry is not correct and needs to be corrected. This means that there is a geomtric problem on your project.
• Other thing, when I do check physics, Flux display this message :
The following faces are not used by any volume:
447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556
Modification possible using GEOMETRY CONSTRUCT VOLUME.
For this reason when you try to solve the porject you get the error message.
Can you try to solve the both problems geometry and physics and try to solve the project.
Best regards.0 -
Hello,
Thanks for your answer. The problem you said happens after building the electrical loop cut. Before I built it, I have checked the geometry and physic. There were no errors. I used the automatic create of cuts. So I don't know how can I solve this problem. This problem comes from automatic electric loop cut, doesn't come from my modell.
0 -
HI,
Can you send me the Flux project before creating the cut?
best regards.
0
Altair Employee