The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
In analysis setup of VWT,
Run time is calculated using, Run time = (30* object length)/ (inflow speed)and for time increment = (2* object height)/(inflow speed* 30)
Can anyone explain how this is derived?
You need a certain run time to 'wash out' the initial phenomena. The idea behind this formula is, we need 30 sweeps of air over the car to reach a stationary 'clean' flow (NOT steady, stationary means a flow which has some kind of periodicity in it).The formula for the time step is based on the expected shedding frequency determined by object height and flow speed. You want to have 30 result points in one cycle for good accuracy.
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
Join us for a community conversation to explore how different modeling approaches in Simcenter PSIM can help engineers simulate power electronics systems while balancing accuracy, simulation speed, and design insight. What you'll learn: Power transistor modeling : Thermal and high fidelity models Protection component…