How to set constraints in this model

anderlanza

Hi,

I'm new in this and I would like to know how to constraint the model as it can be seen in the model when giving it some force in some bars.

Also, I have a problem with the CBUSH properties:  ERROR 14: Missing property #181805 referenced by   CBUSH # 181805

Any help it would be perfect,

Best regards,

Ander

Hüsnü Yalınkılıc

can you share a .out file ?

anderlanza

Hüsnü Yalınkılıc said:

can you share a .out file ?

Sorry for answering so later, but what is the .out file?

Adriano Koga_20259

when you run your model, it writes an output file that can be useful to show some errors like yours.

 

It looks like some of your springs, namely ID 181805 have no property assigned to it. please make sure your model has the right properties assigned to your components.

 

Please take a look at this topic:

https://community.altair.com/community?id=community_question&sys_id=f076043a1b2bd0908017dc61ec4bcbed&view_source=searchResult

anderlanza

Adriano Koga_20259 said:

when you run your model, it writes an output file that can be useful to show some errors like yours.

 

It looks like some of your springs, namely ID 181805 have no property assigned to it. please make sure your model has the right properties assigned to your components.

 

Please take a look at this topic:

https://community.altair.com/community?id=community_question&sys_id=f076043a1b2bd0908017dc61ec4bcbed&view_source=searchResult

Okay thank you very much!

anderlanza

Adriano Koga_20259 said:

when you run your model, it writes an output file that can be useful to show some errors like yours.

 

It looks like some of your springs, namely ID 181805 have no property assigned to it. please make sure your model has the right properties assigned to your components.

 

Please take a look at this topic:

https://community.altair.com/community?id=community_question&sys_id=f076043a1b2bd0908017dc61ec4bcbed&view_source=searchResult

Hi Adriano,

In the image below you can see a RB2 and I want to delete it or just change somo nodes that were selected to others how can I do that?

My question is that all the RB2 and RB3 that I have created in the model are "saved" in auto1 and if I delete it all rigid connections are deleted. There is any way of solving this problem?

anderlanza

anderlanza said:

Hi Adriano,

In the image below you can see a RB2 and I want to delete it or just change somo nodes that were selected to others how can I do that?

My question is that all the RB2 and RB3 that I have created in the model are "saved" in auto1 and if I delete it all rigid connections are deleted. There is any way of solving this problem?

I would have to use the sets?