The Siemens Community Catalyst program was co-created with our community to acknowledge technology leaders who consistently contribute to the Siemens Community. Nominations are accepted on a rolling basis.
Hello everyone,
my graphics card is not supported by hyperworks.
I have an Nvidia GTX 1080.
Do I need a new grahpics card or is there a cheaper solution.
I updated and downgraded the driver without luck.
Thank you very much!
Hello,
Are you seeing any issues?
Here are the recommended graphics cards. That means these have been tested and approved, but doesn't mean others may not work.
https://help.altair.com/hwdesktop/altair_help/topics/getting_started/hw_recommendation_certifications_intro_r.htm#reference_b5n_53c_d1b
However if you are seeing issues you may want to refer to this article as well
https://community.altair.com/community/en/altair-simulation-2022-hardware-and-system-requirements?id=kb_article&sysparm_article=KB0119809
thanks
jason
Hello, Are you seeing any issues? Here are the recommended graphics cards. That means these have been tested and approved, but doesn't mean others may not work. https://help.altair.com/hwdesktop/altair_help/topics/getting_started/hw_recommendation_certifications_intro_r.htm#reference_b5n_53c_d1b However if you are seeing issues you may want to refer to this article as well https://community.altair.com/community/en/altair-simulation-2022-hardware-and-system-requirements?id=kb_article&sysparm_article=KB0119809 thanks jason
You may also want to try the Studio driver instead of the Game Ready one if you are not.
Join us for a community conversation on how High-Performance Computing (HPC) and Simcenter PSIM work together to meet the increasing demands of modern power electronics simulation. During this one-hour technical session, you'll discover how leveraging HPC can speed up simulations, improve scalability, and empower engineers…
Join us for a community conversation on accelerating your motor simulation workflow with Simcenter Simlab. In this beginner-friendly session, we'll introduce the platform's automated model-building capabilities and show how easy it is to set up your first electric motor analysis. You'll see the basic steps of geometry…
Join us for a Community Conversation where we'll discuss practical approaches to analyzing complex electromagnetic models using hybrid solver techniques. This session will provide a general overview of how different computational methods can be combined within a single simulation to address models containing varied…
