Altair RISE

A program to recognize and reward our most engaged community members

Nominate Yourself Now!

All types of edges in model are appearing in blue color

Hello everyone,

I am currently working on a chassis model but all the edges including free, shared, suppressed edges in my model are showing up in blue color even after I have selected geometry color as 2D topo and given different colors to all the types of edges. I am unable to rectify this problem. Any kind of help would be greatly appreciated.

I am also attaching the screenshot of my problem if required.

Thank You.

1_Screenshot (41).png

2_Screenshot (42).png

Find more posts tagged with

English

HyperMesh

OptiStruct

Accepted answers

Viraj_Kulkarni

It works good for me

Can you try couple of things:

1) switching different modes, then coming back to by 2d topo.

2) Or switching to auto, and going to geom-edge edit panel

3) Close Hm and reopen your model

See if any of this works.

Else you might have to clear your preference files. In that case, close all Altair applications. I have attached HyperworksWindowsCleanup.txt, please rename the extension to .bat run the file.

Let me know if that fixes your problem.

HyperworksWindowsCleanup.txt

All comments

Viraj_Kulkarni

These edges aren't already suppressed right? And you have a surfaces no solids?

Is it possible you can share your model, or may be just a part of your model-like couple of tubes.

AshwaniMittal

Yes all edges including free and shared are also showing in blue color. When I am unchecking the shared edges icon from visualization panel, all shared edges disappear which shows they are not suppressed. And my model have all the surfaces and no solids that I have also checked.

I have also added the screenshot and .hm file of the same.

Thank You

Screenshot (43).png

Viraj_Kulkarni

It works good for me

Can you try couple of things:

1) switching different modes, then coming back to by 2d topo.

2) Or switching to auto, and going to geom-edge edit panel

3) Close Hm and reopen your model

See if any of this works.

Else you might have to clear your preference files. In that case, close all Altair applications. I have attached HyperworksWindowsCleanup.txt, please rename the extension to .bat run the file.

Let me know if that fixes your problem.

HyperworksWindowsCleanup.txt

AshwaniMittal

That worked for me.

Thank You for support.